Internal cable routing
Use this information to route the cables for SC777 V4 components.
- Riser and E3.S drive cable routing and configuration matrix
See this section to identify the riser and E3.S drive cable routing required for each configurations of the system. - Bus bar connector sideband cable routing
Use this information to route the bus bar sideband cable. - HMC module cable routing
Use this information to route the cables for the HMC module. - System management sideband cable routing
Use this information to route the cables for the sideband cable (SMM3 cable). - GB200-NVL4 cable routing
Use this information to route the cables connecting to the GB200-NVL4 board. - PCIe riser cable routing in MCIO Configuration
Use this information to route the PCIe riser cables in the MCIO configuration. - PCIe riser cable routing in Dual CX8 mezzanine module configuration
Use this information to route the PCIe riser cables in the Dual CX8 mezzanine module configuration. - E3.S drive 0/1 cable routing
Use this information to route the cables for the E3.S drive 0 / 1. - E3.S drive cable routing in MCIO Configuration
Use this information to route the E3.S drive cables in the MCIO configuration. - E3.S 2/3, 4/5, 6/7, and 8/9 drives in Dual CX8 Mezzanine Module configuration
Use this information to route the cables for installing four E3.S drives in the Dual CX8 Mezzanine Module configuration.
Give documentation feedback