Skip to main content

Node technical specifications

Summary of the technical specifications of the node. Depending on the model, some features might not be available, or some specifications might not apply.

Processor

Processor

Supports multi-core Intel Xeon processors, with integrated memory controller and Intel Mesh UPI (Ultra Path Interconnect) topology.

  • One Intel Xeon 6 series scalable processor with the new LGA 4710 socket
  • Scalable up to 144 cores
  • Up to four UPI links at up to 24 GT/s
  • Thermal Design Power (TDP) up to 350 watts

For a list of supported processors, see: Lenovo ServerProven website.

Memory

Memory

See Memory module installation rules and order for detailed information about memory configuration and setup.

  • Slots: 8 dual inline memory module (DIMM) connectors that support up to eight TruDDR5 6400 MHz RDIMMs
  • The processor has 8 memory channels, with 1 DIMM per channel
  • Memory module types:
    • TruDDR5 6400MHz (2Rx4) RDIMM: 64 GB (2Rx4)
  • Speed:
    • 6400 MT/s for 1 DIMM per channel
    • Operating speed depends on processor model and UEFI settings
  • Maximum memory: 512 GB

For a list of supported memory modules, see: Lenovo ServerProven website.

M.2 Drive

M.2 Drive
Up to two NVMe M.2 drives on the system board.
  • The following form factors are supported:
    • 80 mm (2280)

    • 110 mm (22110)

Up to two M.2 drives on M.2 boot adapter.
  • The following form factors are supported:
    • SATA M.2 drive:
      • 42 mm (2242)

      • 60 mm (2260)

      • 80 mm (2280)

    • NVMe M.2 drive:
      • 80 mm (2280)

For a list of supported M.2 drives, see: Lenovo ServerProven website.

Storage expansion

Storage expansion
  • 2.5-inch drive configuration:
    • Up to six hot-swap 2.5-inch SAS/SATA/NVMe drives

For a list of supported drives, see: Lenovo ServerProven website.

Expansion slots

Expansion slots
  • PCIe riser
    • One PCIe riser on the rear of the node: PCI Express 5.0 x16, HH/HL (single width)
    • The PCIe slot can support one PCIe adapter up to 75 watts
  • OCP module
    • One OCP module slot

Integrated functions and I/O connectors

Integrated functions
  • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.
  • One XCC system management port (10/100/1000 Mbps RJ-45) to connect to a systems-management network. This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions.
  • Rear connectors:
    • A group of two or four Ethernet connectors on OCP Ethernet adapter
    • One Mini DisplayPort connector
    • One XCC system management port (10/100/1000 Mbps RJ-45)
    • One USB 3.2 Gen 1 connector
    • One USB 2.0 connector with Lenovo XClarity Controller (XCC) system management
Note
The maximum video resolution is 1920 x 1200 at 60 Hz.

Network

Network

Two or four connectors on the OCP 3.0 module

RAID adapter

RAID adapter
Software RAID
  • Intel VROC RAID1 Only: supports RAID 1 (requires activation key)
  • Intel VROC Standard: supports RAID 0, 1, and 10 (requires activation key)
  • Intel VROC Premium: supports RAID 0, 1, 5, and 10 (requires activation key)
Hardware RAID
  • ThinkSystem M.2 RAID B545i-2i SATA/NVMe Enablement Kit (RAID 0 and 1)
  • ThinkSystem RAID 545-8i PCIe Gen4 12Gb Adapter (RAID 0, 1, 10)
  • ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb Adapter (RAID 0, 1, 10, 5, 50, 6, and 60 standard)

For more information about the RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference.

Host bus adapter

Host bus adapter
  • ThinkSystem 440-16e SAS/SATA PCIe Gen4 12Gb HBA
  • ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb HBA

For more information about the RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference.

System fan

System fan

Air-cooled configuration: Four high performance or ultra 4056 fans (40 x 40 x 56 mm)

Minimal configuration for debugging

Minimal configuration for debugging
  • The following minimal configuration is required for the node to start:
    • One processor
    • One memory module in DIMM slot 5
    • One power supply in PSU slot 1
    • One boot drive, M.2 or 2.5-inch drive, and RAID adapter if configured (If OS is needed by debugging)
    • Four system fans

Operating systems

Operating systems
Supported and certified operating systems:
  • Microsoft Windows Server
  • VMware ESXi
  • Red Hat Enterprise Linux
  • SUSE Linux Enterprise Server
References: