Skip to main content

Power Restore Policy

When Power Restore Policy is enabled as Restore, SMM remembers the latest node power status and recovery the node to the power status it was before AC is abruptly lost.

Figure 1. Power Restore Policy
Power Restore Policy
Power Restore Policy: Determines the mode of operation after loss of power.
  • Always off

    : Node remains off upon power restore.
  • Restore

    : Node restores to the previous state that was before power failed.
  1. Check the boxes of the nodes that needed to enable power restore policy.

  2. Click Apply to activate the setting.

    The change of the setting and node status in power restore policy will take effect in 1 minute later; therefore, the node state might not be recovered on AC loss before it takes effect.