Parts list
Use the parts list to identify each of the components that are available for your solution.
Go to Lenovo Data Center Support and navigate to the support page for your solution.
Click .
Enter the serial number to view a listing of parts for your solution.
It is highly recommended that you check the power summary data for your solution using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
SD650-I V3 components
| Index | Description | Type |
|---|---|---|
For more information about ordering parts:
| ||
| 1 | Tray cover | F |
| 2 | GPU Power distribution board | F |
| 3 | Power distribution board | F |
| 4 | Rear cross brace | F |
| 5 | Water loop | F |
| 6 | DIMM comb | F |
| 7 | DIMM tool | F |
| 8 | Memory module | F |
| 9 | Memory module filler | F |
| 10 | VR water clamp plate | F |
| 11 | VR water loop trough | F |
| 12 | System board | F |
| 13 | Carrier base board (CBB) for GPU OAM | F |
| 14 | GPU OCP Accelerator Module (OAM) | F |
| 15 | Processor | F |
| 16 | Processor retainer | F |
| 17 | PCIe adapter kit | F |
| 18 | PCIe adapter | F |
| 19 | PCIe riser cage | F |
| 20 | Drive cage | F |
| 21 | 2.5-inch drive (15 mm) | F |
| 22 | 2.5-inch drive (7 mm) | F |
| 23 | Front cross brace | F |
| 24 | SD650-I V3 cam handles | F |
| 25 | KVM cover | F |
| 26 | Blank bezel filler | T1 |
| 27 | Small cross bar enhance bracket | F |
| 28 | Large cross bar enhance bracket | F |
| 29 | M.2 backplane assembly | F |
| 30 | M.2 drive (80 mm and 110 mm) | F |
| 31 | CMOS battery (CR2032) | C |
| 32 | SD650-I V3 tray | F |
| 33 | Compute node water loop carrier | F |
| 34 | GPU node water loop carrier | F |
| 35 | Gap pad kit | F |
| 36 | Miscellaneous Parts Kit | F |
| 37 | SD650-I V3 waterloop Service Kit | F |
| 38 | Cable | F |
| 39 | Putty pad jig | F |