Skip to main content

Front view

The following illustration shows the controls, LEDs, and connectors on the front of the solution.

Note

  • The 6U enclosure supports up to six trays.

  • Each tray contains two nodes; one left node and one right node (when viewed from front of enclosure).

  • SD650-I V3 tray contains one compute node and one GPU node.

SD650-I V3 tray​

The following illustrations show the controls, LEDs, and connectors on the front of each tray.
Note
The illustrations in this document might differ slightly from your hardware.
Figure 1. SD650-I V3 tray
SD650-I V3 tray
Table 1. SD650-I V3 tray indicators, controls, and connectors
1 GPU node / Left node (odd bay numbers)6 Front operator panel LEDs. See Front LEDs for more information.
2 Compute node / Right node (even bay numbers)7 Node power button with LED. See Front LEDs for more information.
3 USB 3.0 Console Breakout Cable connector8 External Diagnostics Handset connector. See External Diagnostics Handset for more information.
4 1 Gb RJ45 Ethernet port with share-NIC feature for Lenovo XClarity Controller. See Front LEDs for more information.

Lenovo XClarity Controller connection is mutually exclusive between RJ45 Ethernet connector and 25Gb SFP28 Port 1.

9 25 Gb SFP28 Ethernet port. See Front LEDs for more information.
5 NMI button.

Press this button to force a nonmaskable interrupt to the processor. You might have to use a pen or the end of a straightened paper clip to press the button. You can also use it to force a blue-screen memory dump. Use this button only when you are directed to do so by Lenovo Support.

10 25 Gb SFP28 Ethernet port (Port 1) with share-NIC feature for Lenovo XClarity Controller. See Front LEDs for more information.

Lenovo XClarity Controller connection is mutually exclusive between RJ45 Ethernet connector and 25Gb SFP28 Port 1.

5 Front operator panel. See Front LEDs for more information.