FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected a Memory DIMM configuration error has been corrected.
Critical - Memory
SNMP Trap ID
Automatically Notify Support
Complete the following steps:
- Could follow an uncorrectable memory error or failed memory test. Check the log and service that event first. DIMMs disabled by other errors or actions could cause this event.
- Verify that the DIMMs are installed in the correct population sequence.
- Update UEFI firmware.
- Replace the DIMM.
- If problem persists, collect Service Data log.
- Contact Lenovo Support.