Configuring Storage-Level Access Guard

There are a number of steps you need to follow to configure Storage-Level Access Guard on a volume or qtree. Storage-Level Access Guard provides a level of access security that is set at the storage level. It provides security that applies to all accesses from all NAS protocols to the storage object to which it has been applied.

Create a security descriptor by using the vserver security file-directory ntfs create command.

Example

vserver security file-directory ntfs create -vserver vs1 -ntfs-sd sd1

Vserver: vs1
   NTFS Security    Owner Name
   Descriptor Name
   ------------     --------------
   sd1              -

A security descriptor is created with the following four default DACL access control entries (ACEs): vserver security file-directory ntfs show -vserver vs1

Vserver: vs1
  NTFS Security Descriptor Name: sd1

    Account Name     Access   Access          Apply To
                     Type     Rights
    --------------   -------  -------         -----------
    BUILTIN\Administrators
                     allow    full-control   this-folder, sub-folders, files
    BUILTIN\Users    allow    full-control   this-folder, sub-folders, files
    CREATOR OWNER    allow    full-control   this-folder, sub-folders, files
    NT AUTHORITY\SYSTEM
                     allow    full-control   this-folder, sub-folders, files

If you do not want to use the default entries when configuring Storage-Level Access Guard, you can remove them prior to creating and adding your own ACEs to the security descriptor.

Optional: Remove any of the default DACL ACEs from the security descriptor that you do not want configured with Storage-Level Access Guard security:
1. Remove any unwanted DACL ACEs by using the vserver security file-directory ntfs dacl remove command.
  Example
  In this example, three default DACL ACEs are removed from the security descriptor: BUILTIN\Administrators, BUILTIN\Users, and CREATOR OWNER.
  vserver security file-directory ntfs dacl remove -vserver vs1 -ntfs-sd sd1 -access-type allow -account builtin\users vserver security file-directory ntfs dacl remove -vserver vs1 -ntfs-sd sd1 -access-type allow -account builtin\administrators vserver security file-directory ntfs dacl remove -vserver vs1 -ntfs-sd sd1 -access-type allow -account "creator owner"
2. Verify that the DACL ACEs you do not want to use for Storage-Level Access Guard security are removed from the security descriptor by using the vserver security file-directory ntfs dacl show command.
  Example
  In this example, the output from the command verifies that three default DACL ACEs have been removed from the security descriptor, leaving only the NT AUTHORITY\SYSTEM default DACL ACE entry:
  vserver security file-directory ntfs dacl show -vserver vs1
  Vserver: vs1 NTFS Security Descriptor Name: sd1 Account Name Access Access Apply To Type Rights -------------- ------- ------- ----------- NT AUTHORITY\SYSTEM allow full-control this-folder, sub-folders, files
Add one or more DACL entries to a security descriptor by using the vserver security file-directory ntfs dacl add command.
Example
In this example, two DACL ACEs are added to the security descriptor:
vserver security file-directory ntfs dacl add -vserver vs1 -ntfs-sd sd1 -access-type allow -account example\engineering -rights full-control -apply-to this-folder,sub-folders,files vserver security file-directory ntfs dacl add -vserver vs1 -ntfs-sd sd1 -access-type allow -account "example\Domain Users" -rights read -apply-to this-folder,sub-folders,files
Optional: Add one or more SACL entries to a security descriptor by using the vserver security file-directory ntfs sacl add command.
Example
In this example, two SACL ACEs are added to the security descriptor:
vserver security file-directory ntfs sacl add -vserver vs1 -ntfs-sd sd1 -access-type failure -account "example\Domain Users" -rights read -apply-to this-folder,sub-folders,files vserver security file-directory ntfs sacl add -vserver vs1 -ntfs-sd sd1 -access-type success -account example\engineering -rights full-control -apply-to this-folder,sub-folders,files

Verify that the DACL and SACL ACEs are configured correctly by using the vserver security file-directory ntfs dacl show and vserver security file-directory ntfs sacl show commands, respectively.

Example

In this example, the following command displays information about DACL entries for security descriptor sd1:

vserver security file-directory ntfs dacl show -vserver vs1 -ntfs-sd sd1

Vserver: vs1
  NTFS Security Descriptor Name: sd1

    Account Name     Access   Access          Apply To
                     Type     Rights
    --------------   -------  -------         -----------
    EXAMPLE\Domain Users
                     allow    read           this-folder, sub-folders, files
    EXAMPLE\engineering
                     allow    full-control   this-folder, sub-folders, files    
    NT AUTHORITY\SYSTEM
                     allow    full-control   this-folder, sub-folders, files

In this example, the following command displays information about SACL entries for security descriptor sd1:

vserver security file-directory ntfs sacl show -vserver vs1 -ntfs-sd sd1

Vserver: vs1
  NTFS Security Descriptor Name: sd1

    Account Name     Access   Access          Apply To
                     Type     Rights
    --------------   -------  -------         -----------
    EXAMPLE\Domain Users
                     failure  read           this-folder, sub-folders, files
    EXAMPLE\engineering
                     success  full-control   this-folder, sub-folders, files

Create a security policy by using the vserver security file-directory policy create command.
Example
The following example creates a policy named policy1:
vserver security file-directory policy create -vserver vs1 -policy-name policy1
Verify that the policy is correctly configured by using the vserver security file-directory policy show command.
Example
vserver security file-directory policy show
Vserver Policy Name ------------ -------------- vs1 policy1
Add a task with an associated security descriptor to the security policy by using the vserver security file-directory policy-task add command with the -access-control parameter set to slag .
Even though a policy can contain more than one Storage-Level Access Guard task, you cannot configure a policy to contain both file-directory and Storage-Level Access Guard tasks. A policy must contain either all Storage-Level Access Guard tasks or all file-directory tasks.
Example
In this example, a task is added to the policy named policy1, which is assigned to security descriptor sd1. It is assigned to the /datavol1 path with the access control type set to slag.
vserver security file-directory policy task add -vserver vs1 -policy-name policy1 -path /datavol1 -access-control slag -security-type ntfs -ntfs-mode propagate -ntfs-sd sd1

Verify that the task is configured correctly by using the vserver security file-directory policy task show command.

Example

vserver security file-directory policy task show -vserver vs1 -policy-name policy1

 Vserver: vs1
  Policy: policy1

   Index  File/Folder  Access           Security  NTFS       NTFS Security
          Path         Control          Type      Mode       Descriptor Name
   -----  -----------  ---------------  --------  ---------- ---------------
   1      /datavol1    slag             ntfs      propagate  sd1

Apply the Storage-Level Access Guard security policy by using the vserver security file-directory policy apply command.
Example
vserver security file-directory apply -vserver vs1 -policy-name policy1
The job to apply the security policy is scheduled.

Verify that the applied Storage-Level Access Guard security settings are correct by using the vserver security file-directory show command.

Example

In this example, the output from the command shows that Storage-Level Access Guard security has been applied to the NTFS volume /datavol1. Even though the default DACL allowing Full Control to Everyone remains, Storage-Level Access Guard security restricts (and audits) access to the groups defined in the Storage-Level Access Guard settings.

vserver security file-directory show -vserver vs1 -path /datavol1

                Vserver: vs1
              File Path: /datavol1
      File Inode Number: 77
         Security Style: ntfs
        Effective Style: ntfs
         DOS Attributes: 10
 DOS Attributes in Text: ----D---
Expanded Dos Attributes: -
           UNIX User Id: 0
          Unix Group Id: 0
         Unix Mode Bits: 777
 Unix Mode Bits in Text: rwxrwxrwx
                   ACLs: NTFS Security Descriptor
                         Control:0x8004
                         Owner:BUILTIN\Administrators
                         Group:BUILTIN\Administrators
                         DACL - ACEs
                           ALLOW-Everyone-0x1f01ff
                           ALLOW-Everyone-0x10000000-OI|CI|IO


                         Storage-Level Access Guard security
                         SACL (Applies to Directories):
                           AUDIT-EXAMPLE\Domain Users-0x120089-FA
                           AUDIT-EXAMPLE\engineering-0x1f01ff-SA
                         DACL (Applies to Directories):
                           ALLOW-EXAMPLE\Domain Users-0x120089
                           ALLOW-EXAMPLE\engineering-0x1f01ff
                           ALLOW-NT AUTHORITY\SYSTEM-0x1f01ff
                         SACL (Applies to Files):
                           AUDIT-EXAMPLE\Domain Users-0x120089-FA
                           AUDIT-EXAMPLE\engineering-0x1f01ff-SA
                         DACL (Applies to Files):
                           ALLOW-EXAMPLE\Domain Users-0x120089
                           ALLOW-EXAMPLE\engineering-0x1f01ff
                           ALLOW-NT AUTHORITY\SYSTEM-0x1f01ff

Give documentation feedback