Install the ID label plate
Use this information to install the identification (ID) label plate on the front panel.
About this task
Attention
Read Safety inspection checklist and Installation Guidelines to ensure that you work safely.
Procedure
Install the ID label plate to the front panel.
Slightly tilt the ID label plate, and insert its clips to the slots on the front panel.
Rotate the outer edge of the ID label plate toward the front panel, then press it to ensure it is installed firmly.
Figure 1. ID label plate installation
After you finish
Reinstall the compute node back to the chassis. See Install the compute node in chassis.
Power on the compute node. See Power on the compute node.
Demo video
Give documentation feedback