Skip to main content

Backplates and backplanes

Use this information to identify the backplate or the backplane you use.

Backplate, four 3.5-inch simple-swap drives (connects to RAID x30 adapter)​

Figure 1. Backplate, four 3.5-inch simple-swap drives (connects to RAID x30 adapter)
Backplate, four 3.5-inch simple-swap drives (connects to RAID x30 card)

Backplate, four 3.5-inch simple-swap drives (connects to RAID x40 adapter)​

Figure 2. Backplate, four 3.5-inch simple-swap drives (connects to RAID x40 adapter)
Backplate, four 3.5-inch simple-swap drives (connects to RAID x40 card)

Backplate, four 3.5-inch simple-swap drives (connects to onboard connectors)​

Figure 3. Backplate, four 3.5-inch simple-swap drives (connects to onboard connectors)
Backplate, four 3.5-inch simple-swap drives (connects to onboard connectors)

Backplane, four 3.5-inch hot-swap drives​

Figure 4. Backplane, four 3.5-inch hot-swap drives
Backplane, four 3.5-inch hot-swap drives

Backplane, eight 2.5-inch hot-swap drives​

Figure 5. Backplane, eight 2.5-inch hot-swap drives
Backplane, eight 2.5-inch hot-swap drives

Backplane, ten 2.5-inch hot-swap drives​

Figure 6. Backplane, ten 2.5-inch hot-swap drives
Backplane, ten 2.5-inch hot-swap drives
Note
If the 95 W processor is used, the server does not support the ten 2.5-inch hot-swap drive backplane.