Skip to main content

Front view

The front view of the server varies by the model.

Front view of the server​

Figure 1. Four simple-swap drives model front view
Four simple-swap drives model front view
Table 1. Components on the four simple-swap drives model front view
1 VGA connector (optional)4 Front operator panel
2 USB 2.0 connector5 Four simple-swap drive bays (0-3)
3 USB 3.1 Gen 1 connector6 Rack release latches
Figure 2. Four hot-swap drives model front view
Four hot-swap drives model front view
Table 2. Components on the four hot-swap drives model front view
1 VGA connector (optional)4 Front operator panel
2 USB 2.0 connector5 Four hot-swap drive bays (0-3)
3 USB 3.1 Gen 1 connector6 Rack release latches
Figure 3. Eight 2.5-inch hot-swap drives model front view
Eight 2.5-inch hot-swap drives model front view
Table 3. Components on the eight 2.5-inch hot-swap drives model front view
1 USB 2.0 connector4 VGA connector (optional)
2 USB 3.1 Gen 1 connector5 Eight 2.5-inch hot-swap drive bays (0-7)
3 Front operator panel6 Rack release latches
Figure 4. Ten 2.5-inch hot-swap drives model front view
Ten 2.5-inch hot-swap drives model front view
Note
The last two drive bays may not be supported if only the eight-bay backplane is installed.
Table 4. Components on the ten 2.5-inch hot-swap drives model front view
1 USB 2.0 connector4 VGA connector (optional)
2 USB 3.1 Gen 1 connector5 Ten 2.5-inch hot-swap drive bays (0-9)
3 Front operator panel6 Rack release latches
  • Front operator panel
    The front operator information panel of the server provides controls, connectors, and LEDs. The front operator panel varies by model.