Remove the flash power module
Use this information to remove the flash power module.
To avoid possible danger, read and follow the following safety information.
When replacing the lithium battery, use only Lenovo specified part number or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
- Throw or immerse into water
- Heat to more than 100°C (212°F)
- Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
- Read the following section(s) to ensure that you work safely.
Turn off the server. Disconnect the power cords and all external cables (see Power off the server).
If server is installed in a rack, remove the server from the rack.
Remove the top cover (see Remove the top cover).
Remove the RAID adapter (see Remove the RAID adapter).
Disconnect the flash power module cable.
To remove the flash power module, complete the following steps:
- Use your finger to lift the flash power module slightly.
- Slide the flash power module out of the server.
If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Demo video