Complete the parts replacement

Use this information to complete the parts replacement.

To complete the parts replacement, do the following:

Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
Properly route and secure the cables in the server. See Internal cable routing.
If you have removed the top cover, reinstall it. See Install the top cover.
Reconnect external cables and power cords to the server.
Attention
To avoid component damage, connect the power cords last.
Update the server configuration if necessary.
- Download and install the latest device drivers: Lenovo Support Portal
- Update the system firmware. See Firmware updates.
- Use the Lenovo XClarity Provisioning Manager to update the UEFI configuration. For more information, see: http://sysmgt.lenovofiles.com/help/topic/LXPM/UEFI_setup.html
- Use the Lenovo XClarity Provisioning Manager to configure the RAID if you have installed or removed a hot-swap drive, a RAID adapter, or the M.2 backplane and M.2 drive. For more information, see: http://sysmgt.lenovofiles.com/help/topic/LXPM/RAID_setup.html

Note

Make sure the latest version of ThinkSystem M.2 with Mirroring Enablement Kit Firmware is applied to avoid virtual disk/array missing after system board replacement.

Give documentation feedback