Install the air baffle

Use this information to install the air baffle.

Read the installation Guidelines

Power off the server for this task

To install the air baffle, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. Air baffle installation

1. Align the air baffle tabs with the slots on both sides of the chassis; then, lower the air baffle into the server.
2. Press the air baffle down until it is securely seated.
   Note

   Close the retaining clip on each end of the DIMM slot before installing the air baffle for proper cooling.
3. Install any RAID super capacitor module that you have removed.

Complete the parts replacement. See Complete the parts replacement.