8 x U.3 AnyBay backplane (two processors)

Use this section to understand the cable routing for eight U.3 AnyBay drives with two 4 x 2.5'' AnyBay backplanes and two processors installed.

Cable routing for 8 x U.3 AnyBay drives and 1 x 16i SFF RAID adapter (Gen 4)​

Figure 1. Cable routing for 8 x U.3 AnyBay drives and 1 x 16i SFF RAID adapter (Gen 4)

From	To	Cable length
1 Power connector on BP1	1 Power connector 2A on processor board	380 mm
2 SAS connectors on BP1 and BP2	2 C0 connector on RAID adapter	900/1020 mm
3 Power connector on BP2	3 Power connector 3A on processor board	520 mm

Cable routing for 8 x U.3 AnyBay drives and 1 x 16i CFF RAID adapter (Gen 4)​

Figure 2. Cable routing for 8 x U.3 AnyBay drives and 1 x 16i CFF RAID adapter (Gen 4)

From	To	Cable length
1 Power connector on BP1	1 Power connector 2A on processor board	380 mm
2 SAS connector on BP1	2 C0 connector on RAID adapter	175 mm
3 Power connector on BP2	3 Power connector 3A on processor board	520 mm
4 SAS connector on BP2	4 C1 connector on RAID adapter	150 mm
5 Power connector on RAID adapter	5 Internal RAID power connector on processor board	210 mm
6 Input connector on RAID adapter	6 PCIe connector 2 on processor board	450 mm