跳到主要内容

10 x U.3 AnyBay backplane (two processors and Compute Complex Neptune Core Module)

Use this section to understand the cable routing for ten U.3 AnyBay drives for two processors and Compute Complex Neptune® Core Module configuration.

Cable routing for 10 x U.3 AnyBay drives and 1 x 16i SFF RAID adapter (Gen 3/Gen 4)​

Figure 1. Cable routing for 10 x U.3 AnyBay drives and 1 x 16i SFF RAID adapter (Gen 3/Gen 4)
Cable routing for 10 x U.3 AnyBay drives and 1 x 16i SFF RAID adapter (Gen 3/Gen 4)

FromToCable length
1 SAS 0 and SAS 1 connector on backplane1

  • C0 and C1 connectors on Gen 3 RAID adapter

  • C0 connector on Gen 4 RAID adapter

1020/1020 mm
2 Power connector on backplane2 Power connectors 14 and 23 on processor board830/830 mm
3 SAS 2 connector on backplane3

  • C2 connector on Gen 3 RAID adapter

  • C1 connector on Gen 4 RAID adapter

900 mm

Cable routing for 10 x U.3 AnyBay drives and 1 x 16i CFF RAID adapter (Gen 4)​

Figure 2. Cable routing for 10 x U.3 AnyBay drives and 1 x 16i CFF RAID adapter (Gen 4)
Cable routing for 10 x U.3 AnyBay drives and 1 x 16i CFF RAID adapter (Gen 4)

FromToCable length
1 C0 connector on RAID adapter1 SAS 0 connector on backplane175 mm
2 Power connector on RAID adapter2 RAID power connector (SR630 V4) on processor board210 mm
3 C1 connector on RAID adapter3 SAS 1 connector on backplane150 mm
4 Input connector on RAID adapter4 PCIe connector 2 on processor board450 mm
5 Power connector on backplane5 Power connectors 14 and 23 on processor board830/830 mm
6 C2 connector on RAID adapter6 SAS 2 connector on backplane210 mm