Skip to main content

Install the security bezel

Use this information to install the security bezel.

Before installing the security bezel, if you have removed the rack latches, reinstall them. See Install the rack latches.

To install the security bezel, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Attention
Before you ship the rack with the server installed, reinstall and lock the security bezel into place.

  1. If the key is held inside the security bezel, remove it out of the security bezel.
    Figure 1. Key removal
    Remove the key from inside of the security bezel.

  2. Carefully insert the tabs on the security bezel into the slots on the right rack latch. Then, press and hold the release latch 1 and pivot the security bezel inward until the other side clicks into place.
    Figure 2. Security bezel installation
    Security bezel installation

  3. Use the key to lock the security bezel to the closed position.
    Figure 3. Locking the security bezel
    Locking the security bezel