Skip to main content

Install the system board

Use this information to install the system board.

To install the system board, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

  1. Touch the static-protective package that contains the new system board to any unpainted surface on the outside of the server. Then, take the new system board out of the package and place it on a static-protective surface.
  2. Hold the release pin 1 and the lifting handle 2 at the same time to lower the system board into the chassis. Then, slide the system board to the rear of the server.
    Ensure that:
    • The new system board is engaged by the mounting stud 3 on the chassis.

    • The rear connectors on the new system board are inserted into the corresponding holes in the rear panel.

    • The release pin 1 secures the system board in place.

    Figure 1. System board installation
    System board installation

After installing the system board:
  1. Install any components that you removed from the failing system board. See the related topics in Hardware replacement procedures.

  2. Push the power supplies into the bays until they click into place.

  3. Complete the parts replacement. See Complete the parts replacement.

  4. Update the machine type and serial number with new vital product data (VPD). Use the Lenovo XClarity Provisioning Manager to update the machine type and serial number. See Update the machine type and serial number.

  5. Enable TPM/TCM. See Enable TPM/TCM.

  6. Optionally, enable Secure Boot. See Enable UEFI Secure Boot.