ThinkSystem SR665 Rear 2x7mm NVMe RAID Enablement Kit
The illustration in this document might differ slightly from your hardware.
This option kit comes with the following components.
- 1 One 7mm SATA/NVMe backplane (bottom)
- 2 One 7mm NVMe backplane (top)
- 3 Two 7mm tray fillers
- 4 One riser cage
- 5 One 7mm drive cage support clip
- 6 One 7mm drive cage
- 7 One 7mm drive cage assembly
- 8 Two M3 screws
- 9 Eight M3.5 screws
- 10 One power cable (175 mm)
- 11 One signal cable (250 mm)
- 12 Two labels (NVMe label and PCIe 4–5 label)
- 13 One signal cable for slot 3 (380 mm)
To install the option, refer to:
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.