ThinkSystem SR665 Rear 2x7mm SATA RAID Enablement Kit

Note

The illustration in this document might differ slightly from your hardware.

This option kit comes with the following components.

• 1 One 7mm SATA/NVMe backplane (bottom)
• 2 One 7mm SATA backplane (top)
• 3 Two 7mm tray fillers
• 4 One riser cage
• 5 One 7mm drive cage support clip
• 6 One 7mm drive cage
• 7 One 7mm drive cage assembly
• 8 Two M3 screws
• 9 Eight M3.5 screws
• 10 One power cable (175 mm)
• 11 One signal cable (250 mm)
• 12 Two labels (SATA label and PCIe 4–5 label)
• 13 One signal cable for slot 3 (380 mm)

Option installation

• To install the option, refer to:

  • Server hardware setup at SR665 Setup Guide

  • Internal cable routing at SR665 Setup Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.