Parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Index | Description | Type |
|---|---|---|
For more information about ordering parts:
| ||
| 1 | Front H100/H200 GPU cold plate module | F |
| 2 | Rear H100/H200 GPU cold plate module | F |
| 3 | NVSwitch cold plate module | F |
| 4 | x16 PCIe riser | F |
| 5 | PCIe adapter | F |
| 6 | PCIe filler (single-slot) | F |
| 7 | Rear drive cage support bracket | F |
| 8 | PCIe riser support bracket | F |
| 9 | System I/O board | F |
| 10 | GPU cable holder | F |
| 11 | Processor | F |
| 12 | Processor carrier | F |
| 13 | System board | F |
| 14 | Memory module | T1 |
| 15 | CMOS battery | C |
| 16 | M.2 drive | F |
| 17 | MicroSD card | F |
| 18 | Venting block | F |
| 19 | PSU cage | F |
| 20 | Rear drive cage | F |
| 21 | Leakage sensor module bracket | F |
| 22 | x8 PCIe riser cage | F |
| 23 | Leakage sensor module bracket for x8 PCIe riser cage | F |
| 24 | Support bracket for x8 PCIe riser cage | F |
| 25 | Cabled riser card | F |
| 26 | Power supply unit | T1 |
| 27 | Rear fan | T1 |
| 28 | PSU interposer | F |
| 29 | Power distribution board | F |
| 30 | Fan control board | F |
| 31 | Chassis | F |
| 32 | Rear top cover | T1 |
| 33 | Shipping bracket | T1 |
| 34 | Front top cover | T1 |
| 35 | Hose guide | F |
| 36 | Chassis lift handle | F |
| 37 | I/O cover | F |
| 38 | Slide rail kit | F |
| 39 | 2.5-inch drive backplane | F |
| 40 | Integrated diagnostics panel | F |
| 41 | 2.5-inch drive filler (1-bay) | T1 |
| 42 | 2.5-inch hot-swap drive | T1 |
| 43 | Front fan | T1 |
| 44 | PCIe switch shuttle | F |
| 45 | PCIe switch board heat sink | F |
| 46 | PCIe switch board | F |
| 47 | CPU complex tray | F |
| 48 | Lenovo Processor Neptune® Core Module | F |
| 49 | Cold plate cover | F |
| 50 | GPU baseboard adapter | F |
| 51 | GPU baseboard | F |
| 52 | GPU | F |
| 53 | HMC card | F |
| 54 | GPU baseboard handle | F |
| 55 | GPU complex | F |
| 56 | H100/H200 GPU service fixture kit | F |
| 57 | GPU water loop service kit | F |
| 58 | DPU air baffle | F |
| 59 | Screw | F |
| 60 | PCM / putty pad kit | F |
| 61 | External cable | T1 |
| Internal cable | F | |
| 62 | Label sheet | F |