FQXSFPU4093G : UEFI setting [arg1] value [arg2] of custom default[arg3] is invalid in current UEFI [arg4].
UEFI setting [arg1] value [arg2] of custom default[arg3] is invalid in current UEFI [arg4].
This message is reported when a previous custom default setting value cannot be applied in current UEFI version. The custom default value used during load custom defaults is not suitable for the current UEFI setting.
Parameters
[arg1] UEFI setting name the same as Redfish DisplayName and System Setup Utility display name.
[arg2] UEFI setting custom default value in Redfish format.
[arg3] UEFI custom default name. Only one custom default is supported now, then always output “”.
[arg4] UEFI current build ID.
Severity
Warning
User Action
Complete the following steps:
- Reset a new customer default for this setting for current UEFI version.
- If it still failed, contact Lenovo Support for help.
Give documentation feedback