Install the top cover
Use this procedure to install the server top cover.
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Before installing the top cover:
To install the top cover, complete the following steps:
- Press and hold on the blue tab of cover release latch; then, rotate the tip of the latch up.
- Place the top cover on top of the server with both sides aligned.
- Push the latch down until it clicks in place.Figure 1. Top cover installation
After installing the top cover, complete the following steps:
Reconnect the power cords and any cables that you removed.
Install the server in the rack.
Power on the server and any peripheral devices.