Skip to main content

Remove the fan cage assembly

Use this procedure to remove the fan cage assembly.

S002
disconnect all power
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
S017
moving parts
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.

Before removing the fan cage assembly:

  1. Read the safety information and installation guidelines (see Safety and Installation Guidelines).

  2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see Power off the server).

  3. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover, or remove the server from the rack.

  4. Remove the top cover (see Remove the top cover).

To remove the fan cage assembly, complete the following steps:

  1. Lift and rotate the fan cage release latches to disengage the fan cage assembly from the server.
    Figure 1. Fan cage assembly removal


  2. Lift the fan cage assembly from the server.

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube