Skip to main content

Complete the parts replacement

Follow this procedure to complete the parts replacement.

To complete the parts replacement, do the following:
  1. Ensure that all the removed components have been reinstalled correctly and that no tools or loose screws are left inside the server.

  2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.

  3. If the server cover has been removed, reinstall it. See Install the server cover.

  4. If the server was removed from the rack previously, put it back into the rack.

  5. Reconnect external cables and power cords to the server.
    Attention
    To avoid component damage, connect all the other cables before connecting the power cords .
  6. Update the server configuration if necessary.