Skip to main content

Install the TCM/TPM adapter (for Chinese Mainland only)

Use this information to install the TCM/TPM adapter.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening

Before installing the TCM/TPM adapter, touch the static-protective package that contains the new TCM/TPM adapter to any unpainted surface on the outside of the server. Then, take the new TCM/TPM adapter out of the package and place it on a static-protective surface.

To install the TCM/TPM adapter, complete the following step:

  1. Locate the TCM/TPM connector on the system board.
  2. Insert the TCM/TPM adapter into the TCM/TPM connector on the system board.
    Note

    • Carefully handle the TCM/TPM adapter by its edges.

    • Your TCM/TPM adapter might look slightly different from the illustration.

    Figure 1. TCM/TPM adapter installation
    TCM/TPM adapter installation

After installing the TCM/TPM adapter:

  1. Install the PCIe adapter retainer. See Install the PCIe adapter retainer.

  2. Complete the parts replacement. See Complete the parts replacement.