Set storage array local user password or SYMbol password
The set storageArray localUsername command and the set storageArray symbol command allow you to set a local user name password or a SYMbol password for a particular role.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin, Support Admin, Security Admin, or Storage Monitor role.
Syntax
set storageArray (localUsername={ admin | storage | security | support | monitor}
| symbol [userRole={admin | monitor}])
password="string" adminPassword="string"
Parameters
| Parameter | Description |
|---|---|
| localUsername | Allows you to specify the user to change the password. Valid choices are: admin , storage , support , monitor , and security . |
| symbol | Allows you to change the SYMbol password. Valid choices are: admin and monitor . |
| password | Allows you to specify the password for the role. |
| adminPassword | Allows you to specify the admin password, which is required to set any new password. |
Examples
SMcli -n Array1 -c "set storageArray localUsername=storage password="newPassword" adminPassword="theAdminPassword";"
SMcli -n Array1 -c "set storageArray localUsername=admin password="newAdminPassword" adminPassword="theAdminPassword";"
SMcli -n Array1 -c "set storageArray symbol userRole=admin password="newSymbolPassword" adminPassword="theAdminPassword";"
SMcli completed successfully.
Give documentation feedback