Show volume group
The show volumeGroup command returns information about a volume group.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin or Storage Monitor role.
Context
The status (Online or Offline)
The capacity
The current owner (the controller in slot
A or the controller in slot B )The RAID level
The drive media type (HDD or SSD)
The drive interface type (Fibre Channel, iSCSI, SAS)
Tray loss protection (yes or no)
Secure capable - indicates whether the volume group is composed of all secure-capable drives. Secure-capable drives can be either FDE drives or FIPS drives.
Secure - Indicates whether the volume group has drive security turned on (this is called secure enabled).
The associated volumes and free capacity
The associated drives
Syntax
show volumeGroup [<var id="GUID-4A516CE4-1F9E-43E9-B2F5-135E1B0C5260__V1112028" className="keyword varname">volumeGroupName</var>]
Parameter
Parameter | Description |
---|---|
volumeGroup | The name of the volume group for which you want to show information. Enclose the volume group name in square brackets ([ ]). |
Notes
This command returns volume group information as shown in this example:
Name: SecureGroup Status: Optimal Capacity: 120.000 GB Current owner: Controller in slotA Quality of Service (QoS) Attributes
RAID level: 5
Drive media type: Hard Disk Drive
Drive interface type: Fibre Channel
Tray loss protection: No
Secure Capable: No
Secure: No
Total Volumes: 1
Standard volumes: 1
Repository volumes: 0
Free Capacity: 110.000 GB
Associated drives - present (in piece order)
Total drives present: 5
Tray Slot
99 1
99 2
99 3
99 4
99 5