Update SNMP trap destination
The set snmpTrapDestination trapReceiverIP command turns on or turns off sending authentication failure messages for an SNMP trap destination. Failure occurs when the SNMP agent received a message from an SNMP manager, but the message contained an invalid community name.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin or Support Admin role.
Syntax
set snmpTrapDestination trapReceiverIP=ipAddress
(communityName="communityName" | (userName="userName" [engineId=(local | engineId)]))
[sendAuthenticationFailureTraps=(TRUE | FALSE)]
Parameters
| Parameter | Description |
|---|---|
| trapReceiverIP | The IP address of the SNMP manager to which you want to send trap messages. |
| communityName | The name of the SNMP community for which you want to send trap messages. |
| userName | The name of the SNMP user for which you want to send trap messages. |
| engineId | The engine ID of the SNMP user for which you want to send trap messages. The engine ID is required if there is more than one USM user with the same user name. The value may be "local" to specify the local SNMP agent is the authoritative agent or a hexidecimal digit string to specify a remote SNMP agent engine ID. |
| sendAuthenticationFailureTraps | This parameter turns on or turns off sending authentication failure messages to an SNMP manager. To send authentication failure messages, set the parameter to TRUE. To prevent sending authentication failure messages, set the parameter to FALSE. The default is TRUE. |
Give documentation feedback