Skip to main content

Set audit log settings

The set auditLog command configures the audit log settings.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Security Admin role.

Syntax​


set auditLog (logLevel={all | writeOnly} | 
    fullPolicy={overwrite | preventSystemAccess} |
    maxRecords=n | warningThreshold=n)

Parameters​

ParameterDescription
logLevel Allows you to specify the level of logging. Valid choices are: all and writeOnly . The default value is writeOnly .
fullPolicy Allows you to specify the policy when the log is full. Valid choices are: overwrite and preventSystemAccess .
maxRecords Allows the user to specify the maximum number of records to be stored where n is an integer starting at 30000 and ending at 50000.
warningThreshold Allows you to specify the percentage at which a warning alert will be sent to indicate that the audit log is nearing full when full policy is set to preventSystemAccess . Use integer values between 0 to 100. Setting this parameter to 0 (zero) disables the warning alerts.

Examples​


SMcli -n Array1 -c "set auditLog logLevel=writeOnly fullPolicy=preventSystemAccess maxRecords=40000 warningThreshold=90;"

SMcli completed successfully.