ISCSI commands
- Create iSCSI initiator
The create iscsiInitiator command creates a new iSCSI initiator object. - Delete iSCSI initiator
The delete iscsiInitiator command deletes a specific iSCSI initiator object. - Diagnose controller iSCSI host cable
The diagnose controller iscsiHostPort command runs diagnostic tests on the copper cables between iSCSI host interface cards and a controller. - Reset storage array iSCSI baseline
The reset storageArray iscsiStatsBaseline command resets the iSCSI baseline to 0 for the storage array. - Save storage array iSCSI statistics
The save storageArray iscsiStatistics command saves the iSCSI performance statistics of the storage array to a file. - Set iSCSI initiator
The set iscsiInitiator command sets the attributes for an iSCSI initiator. - Set iSCSI target properties
The set iscsiTarget command defines properties for an iSCSI target. - Show current iSCSI sessions
The show iscsiSessions command returns information about an iSCSI session for either an iSCSI initiator or an iSCSI target. - Show storage array negotiation defaults
The show storageArray iscsiNegotiationDefaults command returns information about connection-level settings that are subject to initiator-target negotiation. - Show storage array unconfigured iSCSI initiators
The show storageArray unconfiguredIscsiInitiators command returns a list of initiators that have been detected by the storage array but are not yet configured into the storage array topology. - Start iSCSI DHCP refresh
The start controller iscsiHostPort dhcpRefresh command initiates a refresh of the DHCP parameters for the iSCSI interface. - Stop storage array iSCSI session
The stop storageArray iscsiSession command forces the termination of a storage array iSCSI session.
Give documentation feedback