Volume commands

Check volume parity
The check volume parity command checks a volume for parity and media errors, and then writes the results of the check to a file.
Create Volume Mapping
The create mapping volume command creates a logical mapping from a volume to a host or a host group.
Clear volume reservations
The clear volume reservations command clears persistent volume reservations.
Clear volume unreadable sectors
The clear volume unreadableSectors command clears unreadable sector information from one or more volumes.
Create RAID volume (automatic drive select)
The create volume command creates a volume group across the drives in the storage array and a new volume in the volume group. The storage array controllers choose the drives to be included in the volume.
Create RAID volume (free extent based select)
The create volume command creates a volume in the free space of a volume group.
Create RAID volume (manual drive select)
The create volume command creates a new volume group and volume, and lets you specify the drives for the volume.
Create volume in disk pool
The create volume diskPool command creates a new standard RAID volume or a thin volume in an existing disk pool.
Delete volume
The delete volume command deletes one or more standard volumes.
Delete volume from disk pool
The delete volume command deletes either normal or thin volumes from a disk pool.
Increase capacity of volume in disk pool or volume group
The start increaseVolumeCapacity volume command increases the capacity of either a standard volume or a repository volume in a disk pool or volume group.
Initialize thin volume
The start volume initialize command initializes or re-initializes a thin volume.
Recover RAID volume
The recover volume command creates a RAID volume with the given properties without initializing any of the user data areas on the drives.
Remove volume LUN mapping
The remove lunMapping command removes the logical unit number (LUN) or namespace ID (NSID) mapping from one or more volumes.
Repair volume parity
The repair volume parity command repairs the parity errors on a volume.
Repair Data Parity
The Repair Data Parity command repairs data parity errors.
Set thin volume attributes
The set volume command defines the properties for a thin volume.
Set volume attributes for a volume in a disk pool
The set volumes command defines the properties for a volume in a disk pool.
Set volume attributes for a volume in a volume group
The set volume command defines the properties for volumes in a volume group.
Set volume mapping
The set volume logicalUnitNumber command defines the logical unit number (LUN) or namespace ID (NSID) mapping between a volume and a host or host group.
Show thin volume
The show volume command returns the expansion history or the consumed capacity for the specified thin volume or volumes.
Show volume
The show volume summary command returns information about a volume.
Show volume action progress
The show volume actionProgress command returns information about the volume action and amount of the long-running operation that is completed for a long-running operation on a volume.
Show volume performance statistics
The show volume performanceStats command returns information about volume performance.
Show volume reservations
The show volume reservations command returns information about the volumes that have persistent reservations.
Start volume initialization
The start volume initialize command starts the formatting of a volume in a storage array.

Give documentation feedback