BMC Network Configuration
Use this submenu to set the BMC network configuration parameters.
| Submenu item | Options | Description |
|---|---|---|
| BMC network configuration | ||
| Configure IPv4 support | ||
| Lan channel 1 (Shared NIC) | ||
| Configuration Address source | Unspecified | Static | DynamicBmcDhcp | DHCP with Fallback | Select to configure LAN channel parameters statically, dynamically or DHCP with fallback (will get IP after 120s). Unspecified option will not modify any BMC network parameters during BIOS phase The default option is Unspecified. |
| Current Configuration Address source | N/A | Show the current configuration address source. |
| Station IP address | N/A | Enter station IP address. |
| Subnet mask | N/A | Enter subnet mask. |
| Station MAC address | N/A | Show the station MAC address. |
| Router IP address | N/A | Enter router IP address. |
| Router MAC address | N/A | Enter router MAC address. |
| Lan channel 2 (Dedicated NIC) | ||
| Configuration Address source | Unspecified | Static | DynamicBmcDhcp | DHCP with Fallback | Select to configure LAN channel parameters statically, dynamically or DHCP with fallback (will get IP after 120s). Unspecified option will not modify any BMC network parameters during BIOS phase The default option is Unspecified. |
| Current Configuration Address source | N/A | Show the current configuration address source. |
| Station IP address | N/A | Enter station IP address. |
| Subnet mask | N/A | Enter subnet mask. |
| Station MAC address | N/A | Show the station MAC address. |
| Router IP address | N/A | Enter router IP address. |
| Router MAC address | N/A | Enter router MAC address. |
| Configure IPv6 support | ||
| Lan channel 1 (Shared NIC) | ||
| IPv6 Support | Disable | Enable | Enable or disable LAN1 IPv6 support. The default option is Enable. |
| Configuration Address source | Unspecified | Static | DynamicBmcDhcp | Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase. The default option is Unspecified. |
| Current Configuration Address source | N/A | Show the current configuration address source. |
| Station IPv6 address | N/A | Enter station IPv6 address. |
| Prefix Length | N/A | Change the prefix length. |
| IPv6 Router1 IP Address | N/A | Change the IPv6 Router1 IP Address. |
| IPv6 addrss status | Active | Show the IPv6 addrss status. |
| IPv6 DHCP Algorithm | DHCPv6 | Show the IPv6 DHCP Algorithm. |
| Lan channel 2 (Dedicated NIC) | ||
| IPv6 Support | Disable | Enable | Enable or disable LAN2 IPv6 support. The default option is Enable. |
| Configuration Address source | Unspecified | Static | DynamicBmcDhcp | Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase The default option is Unspecified. |
| Current Configuration Address source | N/A | Show the current configuration address source. |
| Station IPv6 address | N/A | Enter station IPv6 address. |
| Prefix Length | N/A | Change the prefix length. |
| IPv6 Router1 IP Address | N/A | Change the IPv6 Router1 IP Address. |
| IPv6 addrss status | Active | Show the IPv6 addrss status. |
| IPv6 DHCP Algorithm | DHCPv6 | Show the IPv6 DHCP Algorithm. |