USB Configuration
Use this submenu to set the USB configuration parameters.
| Submenu item | Options | Description |
|---|---|---|
| USB Configuration | ||
| USB Devices: | ||
| 3 Drives, 1 Keyboards, 1 Mouse , 1 Hubs | ||
| Legacy USB Support | Enable | Disable | Auto | Enable or disable Legacy USB Support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. The default option is Enable. |
| Rear USB Port | Disable | Enable | Enable or disable rear USB Port at the same time. The default option is Enable. |
| Front USB Port0 | Disable | Enable | Enable or disable front USB Port 0. The default option is Enable. |
| Front USB Port 1 | Disable | Enable | Enable or disable front USB Port 1. The default option is Enable. |
| USB Mass Storage Driver Support | Disable | Enable | Enable or disable USB Mass Storage Driver Support. The default option is Enable. |
| Mass Storage Devices: | ||
| AMI Virtual CDROM 1.00 | Auto | Floppy | Forced FDD | Hard Disk | CD-ROM | Mass storage device emulation type. AUTO enumerates devices according to their media format. Optical drivers are emulated as CD-ROM, drives with no media will be emulated according to a drive type. The default option is Auto. |
| AMI Virtual HDisk0 1.00 | Auto | Floppy | Forced FDD | Hard Disk | CD-ROM | Mass storage device emulation type. AUTO enumerates devices according to their media format. Optical drivers are emulated as CD-ROM, drives with no media will be emulated according to a drive type. The default option is Auto. |