Skip to main content

W.3808002 : [W.3808002] An error occurred while saving UEFI settings to the IMM.

[W.3808002] An error occurred while saving UEFI settings to the IMM.

Error Updating System Configuration to IMM

Severity​

Warning

User Response​

Complete the following steps:

  1. Use the Setup Utility to verify and save the settings (which will recover the settings).
  2. Reset the IMM from the CMM.
  3. Use CMM to remove auxilliary power from the compute node. This will reboot the compute node.
  4. Check the IBM support site for an applicable service bulletin or firmware update that applies to this error.
  5. Update the IMM Firmware.
  6. Remove and re-install CMOS battery for 30 seconds to clear CMOS contents.
  7. Replace the system board.