UEFI diagnostic codes
UEFI diagnostic codes can be generated when the compute node starts or while the compute node is running. UEFI diagnostic codes are logged in the IMM event log in the compute node.
- UEFI diagnostic code fields
For each event code, the following fields are displayed: - Finding the UEFI diagnostic code
This topic provides information about finding the UEFI diagnostic code. - I.11002 : [I.11002] A processor mismatch has been detected between one or more processors in the system.
[I.11002] A processor mismatch has been detected between one or more processors in the system. - I.18005 : [I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system.
[I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system. - I.18006 : [I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages.
[I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages. - I.18007 : [I.18007] A power segment mismatch has been detected for one or more processor packages.
[I.18007] A power segment mismatch has been detected for one or more processor packages. - I.18008 : [I.18008] Currently, there is no additional information for this event.
[I.18008] Currently, there is no additional information for this event. - I.18009 : [I.18009] A core speed mismatch has been detected for one or more processor packages.
[I.18009] A core speed mismatch has been detected for one or more processor packages. - I.1800A : [I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages.
[I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages. - I.1800B : [I.1800B] A cache size mismatch has been detected for one or more processor packages.
[I.1800B] A cache size mismatch has been detected for one or more processor packages. - I.1800C : [I.1800C] A cache type mismatch has been detected for one or more processor packages.
[I.1800C] A cache type mismatch has been detected for one or more processor packages. - I.1800D : [I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages. - I.1800E : [I.1800E] A processor model mismatch has been detected for one or more processor packages.
[I.1800E] A processor model mismatch has been detected for one or more processor packages. - I.1800F : [I.1800F] A processor family mismatch has been detected for one or more processor packages.
[I.1800F] A processor family mismatch has been detected for one or more processor packages. - I.18010 : [I.18010] A processor stepping mismatch has been detected for one or more processor packages.
[I.18010] A processor stepping mismatch has been detected for one or more processor packages. - I.2018002 : [I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %.
[I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %. - I.2018003 : [I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - I.3048005 : [I.3048005] UEFI has booted from the backup flash bank.
[I.3048005] UEFI has booted from the backup flash bank. - I.3808004 : [I.3808004] The IMM System Event log (SEL) is full.
[I.3808004] The IMM System Event log (SEL) is full. - I.3818001 : [I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid.
[I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid. - I.3818002 : [I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid.
[I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid. - I.3818003 : [I.3818003] The CRTM flash driver could not lock the secure flash region.
[I.3818003] The CRTM flash driver could not lock the secure flash region. - I.3868000 : [I.3868000] BOFM: System reset performed to reset adapters.
[I.3868000] BOFM: System reset performed to reset adapters. - I.3868003 : [I.3868003] BOFM: Configuration to large for compatibility mode.
[I.3868003] BOFM: Configuration to large for compatibility mode. - I.58015 : [I.58015] Memory spare copy initiated.
[I.58015] Memory spare copy initiated. - I.580A4 : [I.580A4] Memory population change detected.
[I.580A4] Memory population change detected. - I.580A5 : [I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy.
[I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy. - I.580A6 : [I.580A6] Memory spare copy has completed successfully.
[I.580A6] Memory spare copy has completed successfully. - S.1100C : [S.1100C] An uncorrectable error has been detected on processor %.
[S.1100C] An uncorrectable error has been detected on processor %. - S.2011001 : [S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.2018001 : [S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.3020007 : [S.3020007] A firmware fault has been detected in the UEFI image.
[S.3020007] A firmware fault has been detected in the UEFI image. - S.3028002 : [S.3028002] Boot permission timeout detected.
[S.3028002] Boot permission timeout detected. - S.3030007 : [S.3030007] A firmware fault has been detected in the UEFI image.
[S.3030007] A firmware fault has been detected in the UEFI image. - S.3040007 : [S.3040007] A firmware fault has been detected in the UEFI image.
[S.3040007] A firmware fault has been detected in the UEFI image. - S.3050007 : [S.3050007] A firmware fault has been detected in the UEFI image.
[S.3050007] A firmware fault has been detected in the UEFI image. - S.3058004 : [S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings.
[S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings. - S.3060007 : [S.3060007] A firmware fault has been detected in the UEFI image.
[S.3060007] A firmware fault has been detected in the UEFI image. - S.3070007 : [S.3070007] A firmware fault has been detected in the UEFI image.
[S.3070007] A firmware fault has been detected in the UEFI image. - S.3108007 : [S.3108007 ] The default system settings have been restored.
[S.3108007 ] The default system settings have been restored. - S.3818004 : [S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred.
[S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred. - S.3818007 : [S.3818007] The firmware image capsules for both flash banks could not be verified.
[S.3818007] The firmware image capsules for both flash banks could not be verified. - S.51003 : [S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %.
[S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %. - S.51006 : [S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid.
[S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid. - S.51009 : [S.51009] No system memory has been detected.
[S.51009] No system memory has been detected. - S.58008 : [S.58008] A DIMM has failed the POST memory test.
[S.58008] A DIMM has failed the POST memory test. - S.68005 : [S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data.
[S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data. - S.680B8 : [S.680B8] Internal QPI Link Failure Detected.
[S.680B8] Internal QPI Link Failure Detected. - S.680B9 : [S.680B9] External QPI Link Failure Detected.
[S.680B9] External QPI Link Failure Detected. - W.11004 : [W.11004] A processor within the system has failed the BIST.
[W.11004] A processor within the system has failed the BIST. - W.3048006 : [W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event.
[W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event. - W.305000A : [W.305000A] An invalid date and time have been detected.
[W.305000A] An invalid date and time have been detected. - W.3058009 : [W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1.
[W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1. - W.305800A : [W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
[W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. - W.305800B : [W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
[W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. - W.305800C : [W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
[W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. - W.305800D : [W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.
[W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. - W.305800E : [W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
[W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. - W.3808000 : [W.3808000] An IMM communication failure has occurred.
[W.3808000] An IMM communication failure has occurred. - W.3808002 : [W.3808002] An error occurred while saving UEFI settings to the IMM.
[W.3808002] An error occurred while saving UEFI settings to the IMM. - W.3808003 : .[W.3808003] Unable to retrieve the system configuration from the IMM.
.[W.3808003] Unable to retrieve the system configuration from the IMM. - W.3818005 : [W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted
[W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted - W.3868001 : [W.3868001] BOFM: Reset loop avoided - Multiple resets not allowed.
[W.3868001] BOFM: Reset loop avoided - Multiple resets not allowed. - W.3868002 : [W.3868002] BOFM: Error communicating with the IMM - BOFM may not be deployed correctly.
[W.3868002] BOFM: Error communicating with the IMM - BOFM may not be deployed correctly. - W.3938002 : [W.3938002] A boot configuration error has been detected.
[W.3938002] A boot configuration error has been detected. - W.50001 : [W.50001] A DIMM has been disabled due to an error detected during POST.
[W.50001] A DIMM has been disabled due to an error detected during POST. - W.58001 : [W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %.
[W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %. - W.58007 : [W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.
[W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid. - W.580A1 : [W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration.
[W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration. - W.580A2 : [W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration.
[W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration. - W.68002 : [W.68002] A CMOS battery error has been detected
[W.68002] A CMOS battery error has been detected
Give feedback