UEFI diagnostic codes
UEFI diagnostic codes can be generated when a compute node starts up or while a compute node is running. UEFI diagnostic codes are logged in the IMM event log in the compute node.
- UEFI diagnostic code fields
For each event code, the following fields are displayed. - Finding the UEFI diagnostic code
This topic provides information about finding the UEFI diagnostic code. - I.11002 : [I.11002] A processor mismatch has been detected between one or more processors in the system.
[I.11002] A processor mismatch has been detected between one or more processors in the system. - I.18005 : [I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system.
[I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system. - I.18006 : [I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages.
[I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages. - I.18007 : [I.18007] A power segment mismatch has been detected for one or more processor packages.
[I.18007] A power segment mismatch has been detected for one or more processor packages. - I.18008 : [I.18008] Currently, there is no additional information for this event.
[I.18008] Currently, there is no additional information for this event. - I.18009 : [I.18009] A core speed mismatch has been detected for one or more processor packages.
[I.18009] A core speed mismatch has been detected for one or more processor packages. - I.1800A : [I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages.
[I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages. - I.1800B : [I.1800B] A cache size mismatch has been detected for one or more processor packages.
[I.1800B] A cache size mismatch has been detected for one or more processor packages. - I.1800C : [I.1800C] A cache type mismatch has been detected for one or more processor packages.
[I.1800C] A cache type mismatch has been detected for one or more processor packages. - I.1800D : [I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages. - I.1800E : [I.1800E] A processor model mismatch has been detected for one or more processor packages.
[I.1800E] A processor model mismatch has been detected for one or more processor packages. - I.1800F : [I.1800F] A processor family mismatch has been detected for one or more processor packages.
[I.1800F] A processor family mismatch has been detected for one or more processor packages. - I.18010 : [I.18010] A processor stepping mismatch has been detected for one or more processor packages.
[I.18010] A processor stepping mismatch has been detected for one or more processor packages. - I.2018002 : [I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %.
[I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %. - I.2018003 : [I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - I.3048005 : [I.3048005] UEFI has booted from the backup flash bank.
[I.3048005] UEFI has booted from the backup flash bank. - I.3808004 : [I.3808004] The IMM System Event log (SEL) is full.
[I.3808004] The IMM System Event log (SEL) is full. - I.3818001 : [I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid.
[I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid. - I.3818002 : [I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid.
[I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid. - I.3818003 : [I.3818003] The CRTM flash driver could not lock the secure flash region.
[I.3818003] The CRTM flash driver could not lock the secure flash region. - I.3868000 : [I.3868000] BOFM: System reset performed to reset adapters.
[I.3868000] BOFM: System reset performed to reset adapters. - I.3868003 : [I.3868003] BOFM: Configuration to large for compatibility mode.
[I.3868003] BOFM: Configuration to large for compatibility mode. - I.58015 : [I.58015] Memory spare copy initiated.
[I.58015] Memory spare copy initiated. - I.580A4 : [I.580A4] Memory population change detected.
[I.580A4] Memory population change detected. - I.580A5 : [I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy.
[I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy. - I.580A6 : [I.580A6] Memory spare copy has completed successfully.
[I.580A6] Memory spare copy has completed successfully. - S.1100C : [S.1100C] An uncorrectable error has been detected on processor %.
[S.1100C] An uncorrectable error has been detected on processor %. - S.2011001 : [S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.2018001 : [S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.3020007 : [S.3020007] A firmware fault has been detected in the UEFI image.
[S.3020007] A firmware fault has been detected in the UEFI image. - S.3028002 : [S.3028002] Boot permission timeout detected.
[S.3028002] Boot permission timeout detected. - S.3030007 : [S.3030007] A firmware fault has been detected in the UEFI image.
[S.3030007] A firmware fault has been detected in the UEFI image. - S.3040007 : [S.3040007] A firmware fault has been detected in the UEFI image.
[S.3040007] A firmware fault has been detected in the UEFI image. - S.3050007 : [S.3050007] A firmware fault has been detected in the UEFI image.
[S.3050007] A firmware fault has been detected in the UEFI image. - S.3058004 : [S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings.
[S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings. - S.3060007 : [S.3060007] A firmware fault has been detected in the UEFI image.
[S.3060007] A firmware fault has been detected in the UEFI image. - S.3070007 : [S.3070007] A firmware fault has been detected in the UEFI image.
[S.3070007] A firmware fault has been detected in the UEFI image. - S.3108007 : [S.3108007 ] The default system settings have been restored.
[S.3108007 ] The default system settings have been restored. - S.3818004 : [S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred.
[S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred. - S.3818007 : [S.3818007] The firmware image capsules for both flash banks could not be verified.
[S.3818007] The firmware image capsules for both flash banks could not be verified. - S.51003 : [S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %.
[S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %. - S.51006 : [S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid.
[S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid. - S.51009 : [S.51009] No system memory has been detected.
[S.51009] No system memory has been detected. - S.58008 : [S.58008] A DIMM has failed the POST memory test.
[S.58008] A DIMM has failed the POST memory test. - S.68005 : [S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data.
[S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data. - S.680B8 : [S.680B8] Internal QPI Link Failure Detected.
[S.680B8] Internal QPI Link Failure Detected. - S.680B9 : [S.680B9] External QPI Link Failure Detected.
[S.680B9] External QPI Link Failure Detected. - W.11004 : [W.11004] A processor within the system has failed the BIST.
[W.11004] A processor within the system has failed the BIST. - W.3048006 : [W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event.
[W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event. - W.305000A : [W.305000A] An invalid date and time have been detected.
[W.305000A] An invalid date and time have been detected. - W.3058009 : [W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1.
[W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1. - W.305800A : [W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
[W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. - W.305800B : [W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
[W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. - W.305800C : [W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
[W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. - W.305800D : [W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.
[W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. - W.305800E : [W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
[W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. - W.3808000 : [W.3808000] An IMM communication failure has occurred.
[W.3808000] An IMM communication failure has occurred. - W.3808002 : [W.3808002] An error occurred while saving UEFI settings to the IMM.
[W.3808002] An error occurred while saving UEFI settings to the IMM. - W.3808003 : .[W.3808003] Unable to retrieve the system configuration from the IMM.
.[W.3808003] Unable to retrieve the system configuration from the IMM. - W.3818005 : [W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted
[W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted - W.3868001 : [W.3868001] BOFM: Reset loop avoided - Multiple resets not allowed.
[W.3868001] BOFM: Reset loop avoided - Multiple resets not allowed. - W.3868002 : [W.3868002] BOFM: Error communicating with the IMM - BOFM may not be deployed correctly.
[W.3868002] BOFM: Error communicating with the IMM - BOFM may not be deployed correctly. - W.3938002 : [W.3938002] A boot configuration error has been detected.
[W.3938002] A boot configuration error has been detected. - W.50001 : [W.50001] A DIMM has been disabled due to an error detected during POST.
[W.50001] A DIMM has been disabled due to an error detected during POST. - W.58001 : [W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %.
[W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %. - W.58007 : [W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.
[W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid. - W.580A1 : [W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration.
[W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration. - W.580A2 : [W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration.
[W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration. - W.68002 : [W.68002] A CMOS battery error has been detected
[W.68002] A CMOS battery error has been detected
Give documentation feedback