Skip to main content

Test results for the DSA memory isolation test

The following messages can result when you run the DSA memory isolation test.

  • 201-000-000 : Standalone Memory Test Passed

    Quick/Full Memory Test All CPUs Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-000-001 : Standalone Memory Test Passed

    Quick/Full Memory Test CPU 1 Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-000-002 : Standalone Memory Test Passed

    Quick/Full Memory Test CPU 2 Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-000-003 : Standalone Memory Test Passed

    Quick/Full Memory Test CPU 3 Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-000-004 : Standalone Memory Test Passed

    Quick/Full Memory Test CPU 4 Passed.
    Recoverable
    No
    Severity
    Event
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-811-000 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-811-001 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-811-002 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-811-003 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-812-000 : Standalone Memory Test Aborted

    Memory test is not supported for this system.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-812-001 : Standalone Memory Test Aborted

    Memory test is not supported for this system.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-812-002 : Standalone Memory Test Aborted

    Memory test is not supported for this system.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-812-003 : Standalone Memory Test Aborted

    Memory test is not supported for this system.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-813-000 : Standalone Memory Test Aborted

    Chipset Error: Can not turn OFF ECC error reporting in CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-813-001 : Standalone Memory Test Aborted

    Chipset Error: Can not turn OFF ECC error reporting in CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-813-002 : Standalone Memory Test Aborted

    Chipset Error: Can not turn OFF ECC error reporting in CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-813-003 : Standalone Memory Test Aborted

    Chipset Error: Can not turn OFF ECC error reporting in CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-814-000 : Standalone Memory Test Aborted

    Chipset Error: Can not disable Scubbing feature for CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-814-001 : Standalone Memory Test Aborted

    Chipset Error: Can not disable Scubbing feature for CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-814-002 : Standalone Memory Test Aborted

    Chipset Error: Can not disable Scubbing feature for CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-814-003 : Standalone Memory Test Aborted

    Chipset Error: Can not disable Scubbing feature for CPU.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-815-000 : Standalone Memory Test Aborted

    Program Error with Quick Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-815-001 : Standalone Memory Test Aborted

    Program Error with Quick Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-815-002 : Standalone Memory Test Aborted

    Program Error with Quick Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-815-003 : Standalone Memory Test Aborted

    Program Error with Quick Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-816-000 : Standalone Memory Test Aborted

    Program Error with Full Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-816-001 : Standalone Memory Test Aborted

    Program Error with Full Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-816-002 : Standalone Memory Test Aborted

    Program Error with Full Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-816-003 : Standalone Memory Test Aborted

    Program Error with Full Memory Menu Option Selection.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-818-000 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-818-001 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-818-002 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-818-003 : Standalone Memory Test Aborted

    Unable to Locate SMBIOS key "_SM_".
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-819-000 : Standalone Memory Test Aborted

    The start-end address ranges in the restricted area of the memory.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-819-001 : Standalone Memory Test Aborted

    The start-end address ranges in the restricted area of the memory.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-819-002 : Standalone Memory Test Aborted

    The start-end address ranges in the restricted area of the memory.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-819-003 : Standalone Memory Test Aborted

    The start-end address ranges in the restricted area of the memory.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-820-000 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-820-001 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-820-002 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-820-003 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-821-000 : Standalone Memory Test Aborted

    Variable range MTRR registers are larger than fixed range MTRR registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-821-001 : Standalone Memory Test Aborted

    Variable range MTRR registers are larger than fixed range MTRR registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-821-002 : Standalone Memory Test Aborted

    Variable range MTRR registers are larger than fixed range MTRR registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-821-003 : Standalone Memory Test Aborted

    Variable range MTRR registers are larger than fixed range MTRR registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-822-000 : Standalone Memory Test Aborted

    Invalid MTRR service request.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-822-001 : Standalone Memory Test Aborted

    Invalid MTRR service request.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-822-002 : Standalone Memory Test Aborted

    Invalid MTRR service request.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-822-003 : Standalone Memory Test Aborted

    Invalid MTRR service request.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-824-000 : Standalone Memory Test Aborted

    Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run the test.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-824-001 : Standalone Memory Test Aborted

    Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run the test.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-824-002 : Standalone Memory Test Aborted

    Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run the test.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-824-003 : Standalone Memory Test Aborted

    Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run the test.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-826-000 : Standalone Memory Test Aborted

    BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-826-001 : Standalone Memory Test Aborted

    BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-826-002 : Standalone Memory Test Aborted

    BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-826-003 : Standalone Memory Test Aborted

    BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-827-000 : Standalone Memory Test Aborted

    BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-827-001 : Standalone Memory Test Aborted

    BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-827-002 : Standalone Memory Test Aborted

    BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-827-003 : Standalone Memory Test Aborted

    BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-844-000 : Standalone Memory Test Aborted

    Chipset Error: Problem in masking MSR machine check control MASK registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-844-001 : Standalone Memory Test Aborted

    Chipset Error: Problem in masking MSR machine check control MASK registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-844-002 : Standalone Memory Test Aborted

    Chipset Error: Problem in masking MSR machine check control MASK registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-844-003 : Standalone Memory Test Aborted

    Chipset Error: Problem in masking MSR machine check control MASK registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-845-000 : Standalone Memory Test Aborted

    Chipset Error: Problem clearing MSR machine check control registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-845-001 : Standalone Memory Test Aborted

    Chipset Error: Problem clearing MSR machine check control registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-845-002 : Standalone Memory Test Aborted

    Chipset Error: Problem clearing MSR machine check control registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-845-003 : Standalone Memory Test Aborted

    Chipset Error: Problem clearing MSR machine check control registers.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-859-000 : Standalone Memory Test Aborted

    INVALID XSECSRAT type.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-859-001 : Standalone Memory Test Aborted

    INVALID XSECSRAT type.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-859-002 : Standalone Memory Test Aborted

    INVALID XSECSRAT type.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-859-003 : Standalone Memory Test Aborted

    INVALID XSECSRAT type.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-860-000 : Standalone Memory Test Aborted

    No OEM0 type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-860-001 : Standalone Memory Test Aborted

    No OEM0 type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-860-002 : Standalone Memory Test Aborted

    No OEM0 type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-860-003 : Standalone Memory Test Aborted

    No OEM0 type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-861-000 : Standalone Memory Test Aborted

    No SRAT type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-861-001 : Standalone Memory Test Aborted

    No SRAT type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-861-002 : Standalone Memory Test Aborted

    No SRAT type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-861-003 : Standalone Memory Test Aborted

    No SRAT type 1 found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-862-000 : Standalone Memory Test Aborted

    No OEM1 structure found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-862-001 : Standalone Memory Test Aborted

    No OEM1 structure found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-862-002 : Standalone Memory Test Aborted

    No OEM1 structure found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-862-003 : Standalone Memory Test Aborted

    No OEM1 structure found.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-863-000 : Standalone Memory Test Aborted

    No IBMERROR key in OEM1 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-863-001 : Standalone Memory Test Aborted

    No IBMERROR key in OEM1 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-863-002 : Standalone Memory Test Aborted

    No IBMERROR key in OEM1 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-863-003 : Standalone Memory Test Aborted

    No IBMERROR key in OEM1 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-864-000 : Standalone Memory Test Aborted

    No GAS located in OEM1.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-864-001 : Standalone Memory Test Aborted

    No GAS located in OEM1.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-864-002 : Standalone Memory Test Aborted

    No GAS located in OEM1.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-864-003 : Standalone Memory Test Aborted

    No GAS located in OEM1.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-865-000 : Standalone Memory Test Aborted

    No XSECSRAT key in OEM0 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-865-001 : Standalone Memory Test Aborted

    No XSECSRAT key in OEM0 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-865-002 : Standalone Memory Test Aborted

    No XSECSRAT key in OEM0 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-865-003 : Standalone Memory Test Aborted

    No XSECSRAT key in OEM0 structure.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-866-000 : Standalone Memory Test Aborted

    EFI-SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-866-001 : Standalone Memory Test Aborted

    EFI-SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-866-002 : Standalone Memory Test Aborted

    EFI-SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-866-003 : Standalone Memory Test Aborted

    EFI-SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-867-000 : Standalone Memory Test Aborted

    EFI/SAL: Buffer not allocated.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-867-001 : Standalone Memory Test Aborted

    EFI/SAL: Buffer not allocated.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-867-002 : Standalone Memory Test Aborted

    EFI/SAL: Buffer not allocated.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-867-003 : Standalone Memory Test Aborted

    EFI/SAL: Buffer not allocated.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-868-000 : Standalone Memory Test Aborted

    EFI/SAL: Buffer allocated in GetMemoryMap too small.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-868-001 : Standalone Memory Test Aborted

    EFI/SAL: Buffer allocated in GetMemoryMap too small.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-868-002 : Standalone Memory Test Aborted

    EFI/SAL: Buffer allocated in GetMemoryMap too small.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-868-003 : Standalone Memory Test Aborted

    EFI/SAL: Buffer allocated in GetMemoryMap too small.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-869-000 : Standalone Memory Test Aborted

    EFI/SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-869-001 : Standalone Memory Test Aborted

    EFI/SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-869-002 : Standalone Memory Test Aborted

    EFI/SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-869-003 : Standalone Memory Test Aborted

    EFI/SAL Invalid parameter from GetMemoryMap function.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-870-000 : Standalone Memory Test Aborted

    CPU Doamin in ACPI not valid.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-870-001 : Standalone Memory Test Aborted

    CPU Doamin in ACPI not valid.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-870-002 : Standalone Memory Test Aborted

    CPU Doamin in ACPI not valid.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-870-003 : Standalone Memory Test Aborted

    CPU Doamin in ACPI not valid.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-871-000 : Standalone Memory Test Aborted

    Data Mis-compare encountered.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-871-001 : Standalone Memory Test Aborted

    Data Mis-compare encountered.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-871-002 : Standalone Memory Test Aborted

    Data Mis-compare encountered.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-871-003 : Standalone Memory Test Aborted

    Data Mis-compare encountered.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-877-000 : Standalone Memory Test Aborted

    BIOS: Sparing in Extended PCI reg. must be OFF. Go to setup and disable sparing.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-877-001 : Standalone Memory Test Aborted

    BIOS: Sparing in Extended PCI reg. must be OFF. Go to setup and disable sparing.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-877-002 : Standalone Memory Test Aborted

    BIOS: Sparing in Extended PCI reg. must be OFF. Go to setup and disable sparing.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-877-003 : Standalone Memory Test Aborted

    BIOS: Sparing in Extended PCI reg. must be OFF. Go to setup and disable sparing.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-878-000 : Standalone Memory Test Aborted

    Sparing feature must be turned OFF. Go to setup and turn the sparing feature OFF.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-878-001 : Standalone Memory Test Aborted

    Sparing feature must be turned OFF. Go to setup and turn the sparing feature OFF.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-878-002 : Standalone Memory Test Aborted

    Sparing feature must be turned OFF. Go to setup and turn the sparing feature OFF.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-878-003 : Standalone Memory Test Aborted

    Sparing feature must be turned OFF. Go to setup and turn the sparing feature OFF.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-885-000 : Standalone Memory Test Aborted

    Processor does not support MTRR register manipulation. Can not write to memory without cache.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-885-001 : Standalone Memory Test Aborted

    Processor does not support MTRR register manipulation. Can not write to memory without cache.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-885-002 : Standalone Memory Test Aborted

    Processor does not support MTRR register manipulation. Can not write to memory without cache.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-885-003 : Standalone Memory Test Aborted

    Processor does not support MTRR register manipulation. Can not write to memory without cache.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-886-000 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-886-001 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-886-002 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-886-003 : Standalone Memory Test Aborted

    Memory Upper limit is less than 16 Mbytes.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    Related links

  • 201-899-000 : Standalone Memory Test Aborted

    Memory Diagnostics Test Aborted by user.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-899-001 : Standalone Memory Test Aborted

    Memory Diagnostics Test Aborted by user.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-899-002 : Standalone Memory Test Aborted

    Memory Diagnostics Test Aborted by user.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-899-003 : Standalone Memory Test Aborted

    Memory Diagnostics Test Aborted by user.
    Recoverable
    No
    Severity
    Warning
    Serviceable
    No
    Automatically notify support
    No
    Related links

  • 201-901-000 : Standalone Memory Test Failed

    Memory Diagnostics Test Failed.
    Recoverable
    No
    Severity
    Error
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    5. Replace any DIMMS(s) mentioned in error, one by one.
    6. Make sure that all DIMMs are enabled in the Configuration/Setup Utility program.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links

  • 201-901-001 : Standalone Memory Test Failed

    Memory Diagnostics Test Failed.
    Recoverable
    No
    Severity
    Error
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    5. Replace any DIMMS(s) mentioned in error, one by one.
    6. Make sure that all DIMMs are enabled in the Configuration/Setup Utility program.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links

  • 201-901-002 : Standalone Memory Test Failed

    Memory Diagnostics Test Failed.
    Recoverable
    No
    Severity
    Error
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    5. Replace any DIMMS(s) mentioned in error, one by one.
    6. Make sure that all DIMMs are enabled in the Configuration/Setup Utility program.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links

  • 201-901-003 : Standalone Memory Test Failed

    Memory Diagnostics Test Failed.
    Recoverable
    No
    Severity
    Error
    Serviceable
    Yes
    Automatically notify support
    No
    User Response
    Complete the following steps:
    1. Perform the actions mentioned one at a time and try the test after each action.
    2. If the problem remains, contact your technical-service representative.
    3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
    4. Make sure that DSA and BIOS/uEFI are at the latest level.
    5. Replace any DIMMS(s) mentioned in error, one by one.
    6. Make sure that all DIMMs are enabled in the Configuration/Setup Utility program.
    7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
    Related links