Skip to main content

Cabling the front USB cable

The internal routing and connectors for the front USB cable.

The following notes describe additional information you must consider when you install or remove the USB cable:
  • To remove the USB cable on the system board, you have to press on the release latch on the top of the USB cable connector before you can pull out and disengage the USB cable connector from the USB connector on the system board. Pulling the cable out of the connector by excessive force might cause damage to the cable or connector.
  • To connect the USB cable on the system board, press on the release latch on the top of the USB cable connector. Pressing on one side of the cable connector might cause damage to the cable or connector.

The following illustrations show the internal routing and connectors for the front USB cable.

Note
Make sure the relevant cables pass through the cable clips.
Figure 1. USB cable connection
USB cable connection