Removing and replacing Tier 1 CRUs
This section provides information for removing and replacing Tier 1 CRUs in the server.
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing a DIMM
Use this information to remove a memory module. - Memory module installation
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Replacing a hot-swap hard disk drive
Use this information to replace a hot-swap hard disk drive. - Removing a simple-swap hard disk drive
Use this information to remove a simple-swap hard disk drive. - Replacing a simple-swap hard disk drive
Use this information to replace a simple-swap hard disk drive. - Removing the optional DVD drive
Use this information to remove the DVD drive. - Replacing the optional DVD drive
Use this information to replace the DVD drive. - Removing the DVD drive cable
Use this information to remove the DVD drive cable. - Replacing the DVD drive cable
Use this information to replace the DVD drive cable. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing an Lenovo ServeRAID SAS/SATA controller
Use this information to remove an Lenovo ServeRAID SAS/SATA controller. - Replacing an Lenovo ServeRAID SAS/SATA controller
Use this information to replace an Lenovo ServeRAID SAS/SATA controller. - Removing an optional ServeRAID SAS/SATA controller memory module
Use this information to remove an optional ServeRAID SAS/SATA controller memory module. - Replacing an optional ServeRAID SAS/SATA controller memory module
Use this information to replace an optional ServeRAID SAS/SATA controller memory module. - Removing a RAID adapter battery or flash power module
Use this information to remove a RAID adapter battery or flash power module in the server. - Replacing a RAID adapter battery or flash power module
Use this information to replace a RAID adapter battery or flash power module in the server. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device. - Removing the front I/O assembly (USB cable and operator information panel)
Use this information to remove the front I/O assembly (USB cable and operator information panel) in the server. - Replacing the front I/O assembly (USB cable and operator information panel)
Use this information to replace the front I/O assembly (USB cable and operator information panel) in the server. - Removing the Operating temperature enhancement kit
Use this information to remove the Operating temperature enhancement kit in the server. - Replacing the Operating temperature enhancement kit
Use this information to replace the Operating temperature enhancement kit in the server. - Removing a system fan
Use this information to remove a system fan in the server. - Replacing a system fan
Use this information to replace a system fan in the server. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to replace the system battery. - Removing the fixed power supply
Use this information to remove the fixed power supply. - Replacing the fixed power supply
Use this information to replace the fixed power supply. - Removing a hot-swap power supply
Use this information to remove a hot-swap power supply. - Replacing a hot-swap power supply
Use this information to replace a hot-swap power supply. - Removing the PCI riser-card bracket from the PCI riser-card assembly
Use this information to remove the PCI riser-card bracket from the PCI riser-card assembly. - Replacing the PCI riser-card bracket to the PCI riser-card assembly
Use this information to replace the PCI riser-card bracket to the PCI riser-card assembly. - Removing the 2.5-inch hot-swap hard disk drive backplane
Use this information to remove the 2.5-inch hot-swap hard disk drive backplane. - Replacing the 2.5-inch hot-swap hard disk drive backplane
Use this information to replace the 2.5-inch hot-swap hard disk drive backplane. - Removing the 2.5-inch simple-swap hard disk drive backplate assembly
Use this information to remove the 2.5-inch simple-swap hard disk drive backplate assembly. - Replacing the 2.5-inch simple-swap hard disk drive backplate assembly
Use this information to replace the 2.5-inch simple-swap hard disk drive backplate assembly. - Removing the 3.5-inch hot-swap hard disk drive backplane
Use this information to remove the 3.5-inch hot-swap hard disk drive backplane. - Replacing the 3.5-inch hot-swap hard disk drive backplane
Use this information to replace the 3.5-inch hot-swap hard disk drive backplane. - Removing the 3.5-inch simple-swap hard disk drive backplate assembly
Use this information to remove the 3.5-inch simple-swap hard disk drive backplate assembly. - Replacing the 3.5-inch simple-swap hard disk drive backplate assembly
Use this information to replace the 3.5-inch simple-swap hard disk drive backplate assembly. - Replacing software RAID simple-swap hard disk drive backplate with hardware RAID simple-swap hard disk drive backplate
Use this information to replace software RAID simple-swap hard disk drive backplate with hardware RAID simple-swap hard disk drive backplate.
Give documentation feedback