3.5-inch hot-swap model
The following illustrations show the cabling information for the 4x3.5-inch hot-swap SATA/SAS drive backplane assembly.
The following illustration shows the cabling information for the configuration cable in the server:
Figure 1. Cabling information for the configuration cable
![](ch1hw004c.jpg)
![](ch1hw004c.jpg)
The following illustrations show the cabling information for the power cable in the server:
Figure 2. Cabling information for the power cable (redundant power model)
![](ch1hw004d.jpg)
![](ch1hw004d.jpg)
Figure 3. Cabling information for the power cable (fixed power model)
![](ch1hw004e.jpg)
![](ch1hw004e.jpg)
The following illustration shows the cabling information for the hardware RAID cable in the server:
Figure 4. Cabling information for the hardware RAID cable
![](ch1hw004a.jpg)
![](ch1hw004a.jpg)
The following illustration shows the cabling information for the software RAID cable in the server:
Figure 5. Cabling information for the software RAID cable
![](ch1hw004b.jpg)
![](ch1hw004b.jpg)
Give feedback