Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter. - Removing hot-swap drives
Use this information to remove a hot-swap hard disk drive. - Installing hot-swap drives
Use this information to install a hot-swap hard disk drive. - Removing a simple-swap SATA drive
Use this information to remove a simple-swap hard disk drive. - Replacing a simple-swap SATA drive
Use this information to Replacing a simple-swap hard disk drive. - Removing a CD/DVD drive
Use this information to remove a DVD drive. - Installing an optional CD/DVD drive
Use this information to install a DVD drive. - Removing the CD/DVD cable
Use this information to remove a CD/DVD cable. - Replacing the CD/DVD cable
Use this information to install a CD/DVD cable. - Removing a fan
Use this information to remove a fan in the server. - Replacing a fan
Use this information to replace a fan in the server. - Removing a memory module
Use this information to remove a memory module. - Replacing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing a ServeRAID Controller
Use this information to remove an optional ServeRAID Controller. - Replacing an optional ServeRAID Controller
Use this information to Replace an optional ServeRAID Controller. - Removing a remotely installed RAID adapter battery
Use this information to remove a RAID adapter battery remotely in the server. - Replacing a RAID adapter battery remotely in the server
Use this information to install a RAID adapter battery remotely in the server. - Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information to install a USB embedded hypervisor flash device. - Removing a hot-swap power supply
Use this information to remove a hot-swap power supply. - Replacing a hot-swap power supply
Use this information to install a hot-swap power supply. - Removing a hot-swap dc power supply
Use this information to remove a hot-swap dc power supply. - Replacing a hot-swap dc power supply
Use this information to install a hot-swap dc power supply. - Removing the fixed power supply
Use this information to remove the fixed power supply. - Replacing the fixed power supply
Use this information to install the fixed power supply. - Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly. - Replacing a PCI riser-card assembly
Use this information to install a PCI riser-card assembly. - Removing the operator information panel assembly
Use the information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use the information to replace the operator information panel assembly. - Removing the system battery
Use this information to remove the system battery. - Replacing the system battery
Use this information to install the system battery. - Removing the front USB connector board
Use this information to remove the front USB connector board. - Replacing the front USB connector board
Use this information to replace the front USB connector board. - Removing the front video connector
Use this information to remove the front video connector. - Replacing the front video connector
Use this information to replace the front video connector. - Removing the power interposer card assembly
Use this information to remove the power interposer card assembly. - Replacing the power interposer card assembly
Use this information to replace the power interposer card assembly. - Removing the hot-swap drive backplane
Use this information to remove the hot-swap drive backplane. - Replacing the hot-swap drive backplane
Use this information to install the hot-swap drive backplane. - Removing the simple-swap SATA drive backplate assembly
Use this information to remove the simple-swap drive SATA drive backplate assembly. - Replacing the simple-swap SATA drive backplate assembly
Use this information to replace the simple-swap drive SATA drive backplate assembly.
Give documentation feedback