Skip to main content

Starting the LSI Configuration Utility program

Use these instructions to start the LSI Configuration Utility program.

To start the LSI Configuration Utility program, complete the following steps:
  1. Turn on the server, and make sure that the server is the owner of the keyboard, video, and mouse.
  2. When the prompt message is displayed, you may perform either of the following:
    1. ServeRAID-H1110: press Ctrl+C.
    2. ServeRAID-M5110, ServeRAID-M5120, or ServeRAID-M1115: press Ctrl+H.

When you have finished changing settings, press Esc to exit from the program; select Save to save the settings that you have changed.