Cabling backplane
Use this information to cable the backplane.
The following illustration shows the internal routing and connectors for the 3.5-inch simple-swap hard disk drives SATA signal and power cables.
Figure 1. 3.5-inch simple-swap backplate assembly cable connection
![3.5-inch simple-swap backplate assembly cable connection](ct1ab107.jpg)
![3.5-inch simple-swap backplate assembly cable connection](ct1ab107.jpg)
The following illustration shows the internal routing and connectors for the 3.5-inch hot-swap hard disk drives SAS/SATA signal, power and configuration cables with the SAS/SATA adapter installed.
Figure 2. 3.5-inch hot-swap backplane cable connection
![3.5-inch hot-swap backplane cable connection](ct1ab133.jpg)
![3.5-inch hot-swap backplane cable connection](ct1ab133.jpg)
The following illustration shows the internal routing and connectors for the SAS/SATA signal, power and configuration cables with the SAS/SATA adapter installed.
Figure 3. 2.5-inch hot-swap backplane cable connection
![2.5-inch hot-swap backplane cable connection](ct1ab096.jpg)
![2.5-inch hot-swap backplane cable connection](ct1ab096.jpg)
Give feedback