Serial-device problems

Use this information to solve serial-device problems.

Table 1. Serial device problems and actions.
The serial device problems and actions table with one level of row and column headers.
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. If an action step is preceded by (Trained technician only), that step must be performed only by a trained technician. Go to the Support Web site at the Lenovo Support Portal to check for technical information, hints, tips, and new device drivers or to submit a request for information.
Symptom	Action
The number of serial ports that are identified by the operating system is less than the number of installed serial ports.	Make sure that: Each port is assigned a unique address in the Setup Utility and none of the serial ports is disabled. The serial-port adapter (if one is present) is seated correctly. Reseat the serial port adapter. Replace the serial port adapter.
A serial device does not work.	Make sure that: The device is compatible with the server. The serial port is enabled and is assigned a unique address. The device is connected to the correct connector (see System-board internal connectors). Reseat the following components: Failing serial device Serial cable Replace the components listed in step 2 one at a time, in the order shown, restarting the server each time. (Trained technician only) Replace the system board.