Skip to main content

Configuring the server

The following configuration programs come with the server:

  • Setup utility

    The UEFI Setup Utility program is part of the basic input/output system firmware. Use it to change interrupt request (IRQ) settings, change the startup-device sequence, set the date and time, and set passwords. For information about using this program, see Using the Setup utility.

  • Boot Manager program

    The Boot Manager program is part of the server firmware. Use it to override the startup sequence that is set in the Setup utility and temporarily assign a device to be first in the startup sequence. For more information about using this program, see Using the Boot Manager program.

  • ServerGuide Setup and Installation CD

    The ServerGuide program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating system. For information about using this CD, see Using the ServerGuide Setup and Installation CD.

  • Integrated management module II

    Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information about using IMM2, see Using the integrated management module II and the Integrated Management Module User's Guide at the Integrated Management Module II User's Guide website.

  • VMware ESXi embedded hypervisor

    An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase. Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the same time. The USB embedded hypervisor flash device installs in the USB connector on the system board. For more information about using the embedded hypervisor, see Using the embedded hypervisor.

  • Remote presence capability and blue-screen capture

    The remote presence and blue-screen capture features are integrated functions of the Integrated Management Module II (IMM2). The remote presence feature provides the following functions:
    • Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system state
    • Remotely accessing the server, using the keyboard and mouse from a remote client
    • Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
    • Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

    The blue-screen capture feature captures the video display contents before the IMM restarts the server when the IMM detects an operating-system hang condition. A system administrator can use the blue-screen capture feature to assist in determining the cause of the hang condition.

  • Ethernet controller configuration

    For information about configuring the Ethernet controller, see Configuring the Gigabit Ethernet controller.

  • Configuring RAID arrays

    For information about configuring RAID arrays, see Configuring RAID arrays.

  • Advanced Settings Utility (ASU) program

    Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use the ASU program online or out of band to modify UEFI settings from the command line without the need to restart the server to access the Setup utility. For more information about using this program, see Advanced Settings Utility program.