Microprocessor (depending on the model):- Supports multi-core Intel Xeon microprocessors, with integrated memory controller and Quick Path Interconnect (QPI) architecture
- Designed for LGA 1356 socket
- Scalable up to eight cores
- 32 KB instruction cache, 32 KB data cache, and up to 20 MB L3 cache that is shared among the cores
- Support for Intel Extended Memory 32/64 Technology (EM32/64T)
| Memory (depending on the model): - Slots: 12 dual inline memory module connectors on the base system board (six per microprocessor).
- Minimum: 2 GB
- Maximum: 384 GB
- Type: 1066 MHz, 1333 MHz or 1600 MHz, ECC, single-rank or dual-rank
- UDIMM: 2 GB or 4 GB
- RDIMM: 2 GB, 4 GB, 8 GB, 16 GB, or 32 GB (when available)
- Chipkill supported
| Drive expansion bays (depending on the model): - Twelve 3.5-inch or 2.5-inch SAS/SATA hot-swap hard disk drive bays with option to add two more rear 3.5-inch or 2.5-inch SAS/SATA hot-swap hard disk drive bays
- Eight 3.5-inch or 2.5-inch SAS/SATA hot-swap hard disk drive bays
- Eight simple-swap 3.5-inch SATA hard disk drive
- Four simple-swap 3.5-inch SATA hard disk drive.
As a general consideration, do not mix standard 512-byte and advanced 4-KB format drives in the same RAID array because it might lead to potential performance issues. - For specific models that may be shipped initially with four hard disk drives, configuration may be able to expand to eight hard disk drives via Features on Demand (FoD).
- For 2.5" hot-swap hard disk drive support, a converter tray will accompany the drive.
|
PCI expansion slots: Supports eight different PCI adapters and up to five PCI expansion slots depending on server model. - Riser 1 (1U PCI riser-card assembly)
- One full-height half-length PCIe3.0 Express x16 slot, x16 link speed
- One full-height half-length PCIe3.0 Express x8 slot, x8 link speed and one low-profile PCIe3.0 Express x8 slot, x8 link speed
- Riser 1 (2U PCI riser-card assembly):
- One full-height full-length PCIe3.0 Express x16 slot, x16 link speed
- One full-height full-length PCIe3.0 Express x16 slot, x8 link speed and one full-height half-length PCIe3.0 Express x16 slot, x8 link speed
- Riser 2 (1U PCI riser-card assembly):
- One low-profile PCIe3.0 Express x8 slot, x4 link speed
- One low-profile PCIe3.0 Express x8 slot, x8 link speed (
Second CPU must be attached to system board when using this slot)
- Riser 2 (2U PCI riser-card assembly):
- One low-profile PCIe3.0 Express x16 slot, x16 link speed (
Second CPU must be attached to system board when using this slot) - Two low-profile PCIe3.0 Express x16 slot, x8 link speed (
Second CPU must be attached to system board when using these slots)
| Integrated functions:- Integrated Management Module II (IMM2), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote hard disk drive capabilities
- Onboard Intel Powerville 4-port Gigabit Ethernet controller with Wake on LAN support (by default Ethernet 1 and 2 are enabled, to enable Ethernet 3 and 4, it is done through the Features on Demand (FoD))
- Onboard PCH with LSI software RAID with support for RAID levels 0, 1 and 10
- Light path diagnostics
- Eight Universal Serial Bus (USB) ports (two on front, four on rear of server, and two internal for an optional USB hypervisor flash device)
- One serial port
- One video port on rear of server
Maximum video resolution is 1600 x 1200 at 75 Hz. - One front video port based on model.
In messages and documentation, the term service processor refers to the integrated management module II (IMM2).
Integrated Video controller:- Matrox G200eR2 video on system board
- Compatible with SVGA and VGA
- DDR2-250MHz SDRAM video memory controller
- Video memory 16MB is not expandable
- No DVI connector
- Avocent digital video compression
- Maximum video resolution is 1600 x 1200 at 60 or 75 Hz
| ServeRAID controllers:- ServeRAID M1115 SAS/SATA Controller for Lenovo System x
- ServeRAID M5110 SAS/SATA Controller for Lenovo System x
- ServeRAID M5120 SAS/SATA Controller for Lenovo System x
- ServeRAID H1110 SAS/SATA Controller for Lenovo System x
- ServeRAID M5100 Series Battery Kit for Lenovo System X
- ServeRAID C105 for Lenovo System X
ServeRAID controller upgrade:- ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade for Lenovo System x
- ServeRAID M5100 Series 512MB Flash/RAID 5 Upgrade for Lenovo System x
- ServeRAID M1100 Series Zero Cache/RAID 5 Upgrade for Lenovo System x
- ServeRAID M5100 Series Zero Cache/RAID 5 Upgrade for Lenovo System x
- ServeRAID M5100 Series RAID 6 Upgrade for Lenovo System x
- ServeRAID M5100 Series 1GB Flash/RAID Upgrade for Lenovo System x
|
Environment:- Air temperature:
- Server on: 5°C to 40°C (41°F to 104°F); altitude: 0 to 915 m (3000 ft).
- Server on: 5°C to 32°C (41°F to 89.6°F); altitude: 915 m (3000 ft) to 2134 m (7000 ft).
- Server on: 5°C to 28°C (41°F to 82.4°F); altitude: 2134 m (7000 ft) to 3050 m (10000 ft).
- Server off: 5°C to 45°C (41°F to 113°F)
- Shipping: -40°C to 60°C (-40°F to 140°F)
- Humidity:
- Server on: 8% to 85%; maximum dew point: 24°C; maximum rate of change: 5 °C/hr
- Server off: 8% to 80%; maximum dew point: 27°C
- Shipment: 5% to 100%
- Design to ASHRAE Class A3, ambient of 35°C to 40°C, with relaxed support:
- Support cloud like workload with no performance degradation acceptable (Turbo-Off)
- Under no circumstance, can any combination of worst case workload and configuration result in system shutdown or design exposure at 40°C
- Particulate contamination:
Airborne particulates and reactive gases acting alone or in combination with other environmental factors such as humidity or temperature might pose a risk to the server. For information about the limits for particulates and gases, see Particulate contamination.
| Electrical input with hot-swap ac power supplies:- Sine-wave input (50 ~ 60 Hz) required
- Input voltage range automatically selected
- Input voltage low range:
- Minimum: 100 V ac
- Maximum: 127 V ac
- Input voltage high range:
- Minimum: 200 V ac
- Maximum: 240 V ac
- Input kilovolt-amperes (kVA) approximately:
- Minimum: 0.22 kVA
- Maximum: 1.02 kVA
Size:- 2U
- Height: 86.5 mm (3.406 in.)
- Depth:
- EIA flange to rear: 720.2 mm (28.35 in.)
- Overall: 748.8 mm (29.5 in.)
- Width:
- With top cover: 447 mm (17.598 in.)
- Weight: approximately 16.4 kg (36.2 lb) to 28.2 kg (62.2 lb) depending on your configuration
| System fans: Up to three Power supplies (depending on the model):- Up to two hot-swap power supplies for redundancy support
- 550-watt ac
- 750-watt ac
- 750-watt dc
- 900-watt ac
You cannot mix high-efficiency and non-high-efficiency power supplies in the server. Acoustical noise emissions:- Sound power, idle: 6.6 bel
- Sound power, operating: 6.6 bel
- Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.
- The noise emission level stated is the declared (upper limit) sound power level, in bels, for a random sample of machines. All measurements are made in accordance with ISO 7779 and reported in conformance with ISO 9296.
|