Locally: LAN over USB

If you omit any optional parameter, the default value is used. If one or more default values are used and the ASU cannot access the IMM2 by using the LAN over USB access method, the ASU automatically uses the KCS access method.

asu set SYSTEM_PROD_DATA.SysInfoUUID uuid [--host ipaddress]     [--user userid][--password password]

where:

uuid

is the user-assigned hexadecimal value, up to 16 bytes, that identifies the server.

ipaddress

is the internal LAN/USB IP address of the IMM. The default is 169.254.95.118.

userid

is the IMM account name (1 of 12 accounts). The default is USERID.

password

is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter O).

To update the DMI/SMBIOS data, complete the following steps:

1. In the ASU command-line interface, enter the following command:

   asu set SYSTEM_PROD_DATA.SysInfoProdName xxxxyyy [--host ipaddress]     [--user userid][--password password]

   where:

   xxxx

   is the 4-digit machine type of the server.

   yyy

   is the 3-digit model number of the server.

   ipaddress

   is the internal LAN/USB IP address of the IMM. The default is 169.254.95.118.

   userid

   is the IMM account name (1 of 12 accounts). The default is USERID.

   password

   is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter O).

2. Enter the following command:

   asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz [--host ipaddress]     [--user userid][--password password]

   where zzzzzzz is the 7-character serial number of the server.

3. Enter the following command:

   asu set SYSTEM_PROD_DATA.SysEncloseAssetTag aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa [--host ipaddress]     [--user userid][--password password]

   where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the server.