Remotely over a LAN

If you omit any optional parameter, the default value is used.

Note

If you omit any optional parameter, the default value is used.

To update the UUID in the ASU command-line interface, enter the following command:asu set SYSTEM_PROD_DATA.SysInfoUUID uuid --host ipaddress     [--user userid][--password password]

where:

uuid

is the user-assigned hexadecimal value, up to 16 bytes, that identifies the server.

ipaddress

is the external LAN IP address of the IMM.

userid

is the IMM account name (1 of 12 accounts). The default is USERID.

password

is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter O).

To update the DMI/SMBIOS data, complete the following steps:

1. In the ASU command-line interface, enter the following command:

   asu set SYSTEM_PROD_DATA.SysInfoProdName xxxxyyy --host ipaddress     [--user userid][--password password]

   where:

   xxxx

   is the 4-digit machine type of the server.

   yyy

   is the 3-digit model number of the server.

   ipaddress

   is the external LAN IP address of the IMM.

   userid

   is the IMM account name (1 of 12 accounts). The default is USERID.

   password

   is the IMM account password (1 or 12 accounts). The default is PASSW0RD (with a zero, not the letter O).

2. Enter the following command:

   asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz --host ipaddress     [--user userid][--password password]

   where zzzzzzz is the 7-character serial number of the server.

3. Enter the following command:

   asu set SYSTEM_PROD_DATA.SysEncloseAssetTag     aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa --host ipaddress     [--user userid][--password password]

   where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the server.