Logging on to the IMM2 CLI interface using SSH

Use this information to log on to the IMM2 CLI using a Secure Shell (SSH) protocol.

To log on to the IMM2 CLI interface using SSH, complete the following steps:

1. Generate an SSH Server private key, see the Integrated Management Module II User's Guide at Integrated Management Module II for information on how to generate an SSH Server private key.
2. Make sure that the SSH Server is enabled.
3. From the command prompt, type ssh, then press Enter.
4. Type USERID@IPADDRESS in the command prompt (where the USERID and IP ADDRESS is the user ID and IP address for the IMM2 to which you want to log on to), then press Enter.
5. Type the PASSWORD for the IMM2 and press Enter.
6. At the system prompt, type your command.
   Note

   You can type help in the command prompt if you want to see a list of commands that you can use.
7. When you are finished, type Exit, to exit the session.