Skip to main content

Logging on to the IMM2 web interface

Use this information to log on to the IMM2 web interface.

To log on to the IMM2 web interface, complete the following steps:

  1. On a system that is connected to the server, open a web browser. In the Address or URL field, type the IP address or host name of the IMM2 to which you want to connect.
    Note
    If you are logging on to the IMM2 for the first time after installation, the IMM2 defaults to DHCP. If a DHCP host is not available, the IMM2 assigns a static IP address of 192.168.70.125. The IMM network access tag provides the default host name of the IMM2 and does not require you to start the server.
  2. On the Login page, type the user name and password. If you are using the IMM2 for the first time, you can obtain the user name and password from your system administrator. All login attempts are documented in the system-event log.
    Note
    The IMM2 is set initially with a user name of USERID and password of PASSW0RD (with a zero in the word password, not the letter O). You have read/write access. You must change the default password the first time you log on.
  3. Click Log in to start the session. The System Status and Health page provides a quick view of the system status.
Note
If you boot to the operating system while in the IMM2 GUI and the message Booting OS or in unsupported OS is displayed under System Status → System State, disable Windows 2008 firewall or type the following command in the Windows 2008 console. This might also affect blue-screen capture features.

netsh firewall set icmpsetting type=8 mode=ENABLE

By default, the icmp packet is blocked by Windows firewall. The IMM2 GUI will then change to OS booted status after you change the setting as indicated above in both the Web and CLI interfaces.